Is a toilet drain the same size as a shower drain?

Is a toilet drain the same size as a shower drain?

Most shower drains are 2”, while the minimum for a toilet drain is 3”. This means that you are going to have to replace the shower drainpipe, so it is big enough to fit the toilet.

Can you put a shower drain where a toilet was?

If you are remodeling your bathroom and find that the shower will be installed over the location of the previous toilet, you can simply change the toilet drain to a shower drain.

How much clearance do you need for a shower drain?

Without a vent, your shower won’t drain correctly. While a shower usually requires a 2-inch drain pipe, the vent pipe must be either 1 1/2 inches or 2 inches depending on local requirements.

What is the rough-in measurements for a toilet flange?

12 inches is the most common toilet rough-in size. However, it’s useful to know that toilet’s also come in: 10-inch rough-in. 14-inch rough-in.

How do you turn a toilet drain into a shower drain?

How to Change a Toilet Drain to a Shower Drain

1. Unscrew the old toilet flange and pry it loose.
2. Join the 4-inch to 2-inch PVC reducer bushing to the sewer pipe with a 4-inch rubber coupling, if the pipe is metal or non-PVC.
3. Temporarily mount a 2-inch PVC trap under the shower drain location with a pipe hanger.

Why does my toilet back up into the shower?

If you see used water from the toilet backing up into shower or tub drains though, that’s a sign of a clogged sewer main. Since something is blocking the wastewater, it has no other choice but to back up. Since your toilet is set higher, the water is more likely to rise out of the lower tub or shower drain.

Why does a shower require a 2 inch drain?

A 2-inch pipe is the recommended size because showers have a low threshold for flooding, and a 2-inch pipe helps the water drain faster than does a 1 1/2-inch pipe. So, if you are converting from a tub and shower combination to a shower, you’ll likely have to change the drain pipe size.

How high should a shower drain be from the floor?

2″ Drain Pipe should be centered in a hole (approximately 5″ diameter) in the flooring. The top of the Pipe should be no higher than, and no more than 1/8″ lower than, the top surface of the floor on which the base will be set.

How do I know if my toilet is a 10 or 12 rough?

If your toilet has four bolts rather than the standard two, you’ll measure to the center of the rear bolts. The standard rough-in measurements are 10, 12 and 14 inches. If your measurement is in between these intervals, round your number down to the nearest standard measurement.

Can you replace a 12-inch rough in toilet with a 10-inch rough in toilet?

A toilet with a 12-inch rough-in will definitely not fit into a space with a 10-inch rough-in, but a toilet with a 10-inch rough-in actually has extra space in a 12-inch rough-in space.

Can a toilet drain be converted to a floor drain?

You have two options if you remove the toilet. Either you attach plumbing to it so that a sink drains into it, with a sink P trap between the sink and the current drain. Or, you break open the concrete and add a P trap to the drain so that it now is a standalone floor drain.

How do you fix a shower backed up toilet?

If the clog is local — as in it’s in the shared drain pipe — you’ll basically just need to unclog the toilet. To clear the clog, you can use a plunger on the toilet to break it loose. To make this step more effective, seal off the drain in the shower and then plunge the toilet up and down several times.