What is Dymonic FC used for?
Typical applications for Dymonic FC include expansion and control joints, precast concrete panel joints, perimeter caulking (windows, door, panels), EIFS, aluminum, masonry and vinyl siding. Dymonic FC is fast curing with a skin time of 60 min and a tack-free time of 3 to 4 hr to significantly reduce dirt attraction.
Is Dymonic 100 waterproof?
Suitable for water immersion and will not out gas. Formulated with an innovative polymer technology, similar to TREMproof® 250GC and Vulkem® 45SSL, Dymonic 100 is highly versatile and has a unique capability to adhere to damp or green concrete and will not out gas.
What is polyurethane sealant?
Polyurethane sealants are used to seal joints in a wide variety of construction applications. Polyurethane sealants are able to bond to most surfaces, particularly porous substrates such as concrete and masonry. These sealants have a very high bond strength and are ideal in demanding applications.
Is NP1 waterproof?
Excellent waterproofing NP1 isn’t merely water-tight, it can be fully submerged in water without losing its grip or seal. While not recommended for applications that will remain permanently submerged, it can resist even the most powerful sources of water.
What is a backer rod used in caulking?
Backer rods are usually round, flexible lengths of foam that are used as a “backing” in joints or cracks to help control the amount of sealant/caulking used and create a back stop. Many sizes/diameters are available for optimal fitting to the size of the joint being sealed.
What is sikaflex 15 lm used for?
Excellent for moving joints in vertical applications. Suitable for use between similar as well as dissimilar materials. Typical applications include joints in concrete panel and wall systems, around window and door frames, reglets, flashing, common roofing detail applications, etc.
What does non sag caulk mean?
A compound that exhibits little or no flow when applied in vertical or inverted joints.
Is polyurethane a good sealer?
Oil-based polyurethane is a very durable and hard-curing finish. But polyurethane doesn’t bond so well over finishes marketed as sealers, especially over sanding sealer. This sealer is good for use under non-polyurethane varnishes because regular alkyd varnishes gum up sandpaper.
Is polyurethane sealer waterproof?
Polyurethane, varnish, and lacquer are tried-and-true sealants with excellent waterproofing properties. They’re either brushed or sprayed onto clean, sanded wood and then allowed to dry completely, prior to the piece being lightly re-sanded and recoated.
How long does it take for NP1 to cure?
$9.29
| Size | 10.1 Oz. |
|---|---|
| Cure Time | 7 Days |
| Color Family | Grays |
| Dries To Touch | 24 Hrs. |
| Indoor/Outdoor | Indoor/Outdoor |
Can you use NP1 in the rain?
As long as the surface to which you are applying the Np-1 is completely dry, you can apply this product. If you think it will rain within 1 or 2 hours after application… wait.
When should you use backer rod?
A backer rod fills a wide gap between surfaces to allow you to more easily fill the gap with caulk. Commonly, you use a backer rod to help bridge a gap that is 1/4 to 1/2 inches or more wide.
What can dymonic FC sealant be used for?
Dymonic FC is a durable, flexible, sealant that offers excellent performance in moving joints and exhibits tenacious adhesion once fully cured. Typical applications for Dymonic FC include expansion and control joints, precast concrete panel joints, perimeter caulking (windows, door, panels), EIFS, aluminum, masonry and vinyl siding.
What kind of sealant is Tremco dymonic 100?
High-Performance, High-Movement Single-Component, Polyurethane Sealant Dymonic® 100 is a high-performance, high-movement, single-component, medium-modulus, low-VOC, UV-stable, non-sag polyurethane sealant.
What do you need to know about dymonic FC?
Dymonic® FC is a high-performance, fast-curing, single-component, low- modulus, hybrid sealant, formulated with proprietary silane end-capped polymer technology. Basic Uses. Dymonic FC is a durable, flexible, sealant that offers excellent performance in moving joints and exhibits tenacious adhesion once fully cured.
What can the dymonic 100 be used for?
Dymonic 100 is also an excellent choice as a fluid applied flashing material in rough opening perimeters for fenestration/window, door and curtain wall applications. How damp can the substrate be prior to sealant application?