How do you reset a Norcold RV refrigerator?

How do you reset a Norcold RV refrigerator?

Press and hold the TEMP SET button on the fridge control panel. When ‘Er’ shows on the screen release the TEMP SET button. When ‘CL’ shows on the screen, wait five seconds and press and hold the TEMP SET button until ‘Er’ is shown on the screen again. Cycle the fridge off/on to see if the “no co” error is erased.

Are there any problems with the Norcold refrigerator?

However, like other equipment and appliances, the refrigerator may “act up” or have some issues that make it difficult to get the most out of your machine. Troubleshooting your Norcold refrigerator can help clear some of the issues you may be having with your unit. While Norcold offers many different models, some troubleshooting steps are similar.

What kind of power does a Norcold gas absorption refrigerator use?

Norcold gas absorption refrigerators operate off of 12V DC power (battery power). The AC plug that you see in the back is only powering your AC Heater/s that will cool the refrigerator when running it on AC or Auto Mode. The 12V DC powers the rear power board, the front control board, and the interior light. What to check!

Where is the reset button on a Norcold refrigerator?

Pin 15 is the socket to the right of the white/violet wire. Using an insulated jumper wire, short Pin 15 to the power board ground lug for 10-15 seconds. A click sound will indicate when the controls are reset. Turn the refrigerator OFF. Turn the refrigerator ON to verify that the reset was successful.

Where are the fuses on the Norcold refrigerator?

Norcold refrigerator fuse location. There are three fuses located on the main control board (power board). Two are automotive style fuses used to protect DC voltage circuits (FI and F2) and one is a glass body cartridge style fuse (F3) used to protect AC voltage circuits.