Does Gila film go on the inside or outside of the window?

Does Gila film go on the inside or outside of the window?

Durable, attractive and simple to put on, tinted window films like Gila cut down on glare, increase privacy, and provide extra insulation. Applying Gila film is best done with a helper, and must always be done on the inside of the glass.

Can I use Windex to apply Gila Window Film?

Can I use Windex to use Gila Window Film? It must be absolutely clean and free of dirt. Do not use Windex or other household cleaners on the glass as the film does not adhere well and the chemicals in the cleaners can degrade the plastic.

Can you put window film on both sides of glass?

Yes, you can put films on the outside surface of the glass. Keep in mind that window films are generally installed on the inside to protect them from the elements. In the past, exterior window films were overlooked because of the perception of poor durability and performance.

Can you apply Gila window film with water?

A: We recommend using Gila FILM AID concentrate mixed with one quart of water. If you do not have FILM AID, mix ¼ tsp. no tears baby shampoo (without conditioner) with one quart of water. If the appearance of the plastic is not important, film can certainly be applied.

What can I use instead of Gila application solution?

If your local retailer does not stock Gila Application Solution, you can make a fair substitute by adding a quarter of a teaspoon of no tears baby shampoo (without conditioner) to one quart water, shake up, allow the bubbles to settle, then use.

Can window film cause windows to crack?

Properly specified window film adds acceptable levels of solar heat absorption to the glass surface. The added solar heat absorption, even though it is deemed an acceptable level for the glass, can occasionally act as a catalyst, exposing the weakness in the glass and causing the glass to physically crack.

How do you make soapy water for window film?

o For wetting solution, use a solution of mild dish soap (i.e., Dawn® or Joy®) and water. For a 32oz. spray bottle, add 4 to 5 drops of soap.

Can you apply Gila Window Film with water?

What’s the best way to put Gila on a window?

Applying Gila film is best done with a helper, and must always be done on the inside of the glass. Clean the outside of the window thoroughly by spraying a generous amount of glass cleaner over the entire window. Scrub the glass with a clean, lint-free shop cloth.

How do you remove Gila tape from a window?

Wet the window thoroughly with the Gila application solution. Soak it really well. Pull the tape apart to separate the clear lining from the Gila film. Have your helper hold the film flat as you peel the liner away, spraying the newly exposed side of the Gila film with the Gila application solution as you go.

Where do you apply Gila glare control film?

Apply the Glare Control films to the INSIDE of single-pane windows, and to the OUTSIDE of dual-pane windows. If you have exterior (outside) removable storm panes, apply the film to the INSIDE of the storm pane. If you have interior (inside) removable storm panes, apply the film to the INSIDE of the fixed window, and not the storm pane.

Is the Gila window film safe for dual pane windows?

Q: Is Gila Window Film safe for dual-pane windows? A: All Gila Window Films are safe for dual pane windows if used correctly. Most can be applied to the inside of dual pane windows with the exception of Glare Control and Privacy Control Black (outside only).