What are the regulations for hanging a dart board?
Dart Board Height: 5 feet. 8 inches from floor to the center of the bull’s-eye. Distance from front of the dartboard to the throwing line: Steel Tip: 7 feet 9 1/4 inches, Soft Tip: 8 feet 0 inches. To mark the throw line a simple piece of tape will suffice.
Can you hang a dartboard on drywall?
To hang a dartboard on drywall, it’s best to mount the board to a wall stud. The stud provides ample support for the dartboard’s weight. A board can weigh 10 pounds or more, enough to rip the mounting screws out of drywall if the board is hung from drywall without wall anchors.
What do you put behind a dart board to protect walls?
A dart surround is a foam border that is cut precisely to fit around a dartboard. This offers immediate protection to your wall from any stray darts that misses the board.
How do you hang an arachnid dart board?
Choose a location to hang the board that is near an electrical outlet, and that has at least 10 feet of open floor space in front of the board. 2. Locate a wall stud, and place a mark 76 3/8” (194cm) up from the floor along the stud (see illustration above). Place another mark 16” (40.64cm) below the first mark.
Where do you hang a dart board?
Best Place to Hang a Dart Board Find an open space such as the basement, game room, or outside in the backyard. The area should be at least 5 feet wide and 11 feet long. Darts can bounce over 8 feet from the bull’s eye so make sure that you make the proper accommodations.
What are dart rules?
Each player starts with a score of 501 and takes turns to throw 3 darts. The score for each turn is calculated and deducted from the players total. Bullseye scores 50, the outer ring scores 25 and a dart in the double or treble ring counts double or treble the segment score.
How do you hang a wooden dart board?
Position the dartboard into the cabinet and slip the head of the center screw into the mounting bracket. If the board is too loose, remove it, tighten the screw slightly and then remount the dartboard. Position the dartboard with the 20 position pointing straight up.
Where do you place a dart board?
How do you hang a US dart board?
When playing with soft tip darts, the throw line (oche) should be 7 ft. 9 ¼ inches (2.73 m) from the face of the board. This distance should be increased to 8 feet for steel tip darts. This is be measured from the face of the board and does not to include the space between the face of the dartboard and the wall.
The regulation height for hanging a dartboard requires that the centre of the bull’s eye should be 5 feet 8 inches above the floor.
How high do you hang a dart board?
If you want to stick to the official rules of darts, you will need to hang your dartboard approximately 5’8” high on the wall from the floor. You measure this from the floor to the bullseye in the middle of the dartboard. Use a pencil to mark this area on the wall.
How high to hang a dart board from floor to the bullseye?
The official height of a dartboard from floor to bulls eye is 5 ft. 8 inches (1.73 m) . This is eye level for a player who is 6 feet tall. When playing with soft tip darts, the throw line (oche) should be 7 ft. 9 ¼ inches (2.73 m) from the face of the board.
How high does a dart board hang?
The board needs to hang exactly 5 feet 8 inches from the floor to the center of the bull’s-eye. Most quality dartboards have a screw in the center. However, if you have a board that hangs from the top, you will have to measure the distance to the center of the bull’s-eye and add that to the height.