What are the specs on a 350 engine?

What are the specs on a 350 engine?

What are the specs of a Chevy 350 engine? It’s a 5.7L (350 cubic inch) small-block, V8 engine with a 4.00-inch bore and a 3.48-inch stroke. Depending on the year, make, and model of the car that it is equipped in, this engine is capable of outputting between 145 to 370 horsepower.

How much HP does a stock 350 have?

Power output and torque ratings have, of course, varied quite a bit throughout the years. However, the original Chevy 350 put out 295 HP and 380 lb-ft of torque. Another fun fact: the engine’s exact displacement is 349.85 cubic inches (5.7 L if you go by metric).

How many cylinders does a 350 engine have?

Internal Specifications Also known as the General Motors 5.7L V8 engine, the 350 achieves its displacement by using a 4 inch cylinder bore and a crankshaft stroke of 3.48 inches. The engine uses a wet-sump oiling system with a 5 quart oil pan.

What are the torque specs for a 350 Chevy?

Low-End Torque Specs Main-cap torque specification on the typical Chevrolet 350 two-bolt-main engine is 70 ft. -lbs. Specifications for the four-bolt-main are 70 ft. -lbs for the inner bolts, 65 ft.

How can I make my 350 faster?

No matter what application your Chevy 350 motor is in, a few simple steps can get you more better performance and higher horsepower.

1. Modify your air intake.
2. Modify your exhaust.
3. Change your camshafts and valve train.
4. Purchase new cylinder heads, or have yours ported and polished.
5. Have your motor rebuilt and blueprinted.

Is 5.3 or 5.7 engine better?

IMO-The 5.3 is definately a faster motor but the 5.7 seems to handle weight better. My 5.3 averages about 17mpg while and I got about 15mpg with my 5.7. It is hard to get a good comparison though. The 5.7 was a Z71 regular cab, short bed with an auto and 3.73s.

What is the difference between a 350 and a 383 stroker?

The biggest advantage to putting a crankshaft from a Chevy 400 into a 350 block to produce 383 cubic inches is that more displacement equals more power. Also, the longer crank throw produces more downward thrust, which translates into torque. And torque is what we’re after, especially in a truck.

What are the torque specs for a Chevy 350 engine?

The Chevrolet 350 cylinder-head torque specification is 65 ft.-lbs. The intake installed onto cast-iron heads requires 30 ft.-lbs. If your engine has aluminum cylinder heads, the threads are more fragile than the cast iron, so the intake specification is 18 ft.-lbs.

What is the stock horsepower for a 350 Chevy engine?

The Chevy 350 engine is a 350 cubic inch (5.7-liter) small block V8 with a 4.00 and 3.48 inch bore and stroke. Depending on the year, make and model of a car, horsepower ranges from approximately 145 to more than 370. Among them is Mr. Goodwrench, which produces new Chevy 350 crate engines in numerous configurations. The base version of this engine makes 195 horsepower and features an 8.5 compression ratio.

What is 350 Chevrolet engine?

Chevy 350 engine was primarily introduced in the year 1967. It is a small block motor found in Chevrolet coupes. 350 in the engine signifies its cubic inch displacement. Known to be an internal combustion engine, it has 8 cylinders to carry out both power and performance. Chevy 350 engine opened up the way for larger 2.45 inch main journals…

What are the timing specs on a Chevy 350?

The 350’s timing specifications are almost identical to the other small blocks. However, the ignition timing for the 255-horsepower version with manual transmission is at Top Dead Center and 4 degrees BTDC with automatics.