Why did my staples shredder stop working?

Why did my staples shredder stop working?

1. Make sure that the unit is securely plugged into a working outlet / socket. 2. If you have been continuously shredding for an extended period of time, the unit may have overheated and the thermal protection feature has been activated to shut off the machine.

Why is my paper shredder not working?

2 Answers. It is possible that you unit has overheated. If you have been shredding papers for a long period of time or have been inserting large amounts of paper then your device may have overheated. Turn off your device and let it cool down for 30 minutes before attempting to use it again.

What does the red light mean on a Staples shredder?

Yes, the RED LIGHT comes on when you separate the SHREDDING HEAD from the bucket. When you put the SHREDDING HEAD back into place after emptying the bucket, the RED LIGHT goes off. If you shredder is not shredding, is there a chance that you have overheated the unit.

How do you reset a paper shredder?

Clear any jammed paper and see if this resolves the problem. b) The shredder may need to be reset. Switch it to the reverse (R) position for 2 seconds and then back to auto (I). This should reset it and it will operate again.

Where is the sensor on a paper shredder?

On small shredders, the sensor is normally a mechanical sensor, which looks like a plastic bar or lever in the very center of the mouth of the shredder, (Where you normally insert the paper). When shredding small documents, such as checks or receipts, be sure that you are inserting the paper directly over this sensor.

How do you reset a shredder?

How to unjam a shredder

1. Unplug the shredder. This is the first and most important part of any attempt at fixing a paper jam.
2. Empty the wastebasket.
3. Switch to reverse.
4. If the shredder jams in reverse switch back to auto/forward.
5. Reduce the thickness of your load before re-shredding.

How do you clean a shredder sensor?

Once you locate the sensors, use a cotton swab dampened with rubbing alcohol to wipe away any residue or dust. You may need to clean it a couple of times. Also if there is any visible paper debris in this area, remove with cotton swab or needle nosed pliers.

Should shredders be oiled?

All paper shredders need to be oiled because paper dust builds up inside the cutting assembly. As a guide, oil your cross-cut shredder every 1/2 hour of shredding time.

How do you unblock a Pro Action shredder?

If your shredder cannot unjam itself, you will need to do this manually.

1. Unplug your shredder.
2. Remove the top shredding section.
3. Use a pair of tweezers to remove all jammed strands of paper from the blades.
4. Cut all curled pieces of paper.
5. If plastic is causing the jam, use a screwdriver to clear the block.

Is it possible to repair a Staples Shredder?

Sometimes, the basic methods of troubleshooting and shredder repair will get your Staples shredder working again. (See Basic Troubleshooting Guide) On the other hand, if you cannot find the parts that you need for your Staples shredding machine, it is sometimes advantageous to replace it.

Why does my Shredder not work at all?

Shredder Troubleshooting FAQ The shredder does not power on or work at all. 1. Make sure that the unit is securely plugged into a working outlet / socket. 2. If you have been continuously shredding for an extended period of time, the unit may have overheated and the thermal protection feature has been activated to shut off the machine.

What to use to clear paper in Shredder?

Insert a filing folder or any rigid sheet of cardstock (old greeting card, sheet torn from cereal box, or a couple index cards) directly into the center of the feed entry while applying force to help push the jammed paper through. This will usually clear any paper blockage or other obstructions.

What should I do if my Shredder gets too hot?

OVERHEATING: ± The overheat indicator will turn red and the machine will shut off if the motor becomes too hot after shredding for more than 25 minutes ± Let the shredder cool until the overheat indicator turns off (about 60 minutes) ± Turn the shredder off and on again; continue shredding as normal MAINTENANCE: