How much does a roll of barbed wire cost?
Barbed Wire Prices Per Foot or Roll. Price ranges from $0.03 to $0.08 per foot, or between $60 and $110 per standard, 1,320-foot roll.
How long is Ngombe barbed wire?
610M
Ngombe Barbed Wire 610M – Copia Kenya.
How many Metres is a roll of barbed wire?
Single strand barbed wire, 5.25″ barb distance, 23.8 kg per roll, 845 m length.
How long is a barbed wire roll in Kenya?
It is available in two sizes which are the 220 meter roll and the 180 meter roll.
Is it legal to put barbed wire on your fence?
Barbed wire fencing is legal in various circumstances, most notably for landowners in rural areas and in various industrial areas. However, whenever installing barbed wire fencing you must meet the legal fence requirements as deemed by local legislation.
What gauge is barbed wire?
12½ gauge
Today barbed wire is commonly available as two strands of 12½ gauge wire with four-point barbs of 14 ga. wire spaced 5 to 6 inches apart. This wire is formed from low tensile steel with a breaking strength of about 950 pounds. Commonly the zinc coating is less than or equal to Class l.
How long is razor wire?
Galvanized steel razor barbed wire, coil diameter 500 mm, 700 mm, 900 mm, size: 1′ height × 20′ length.
How many meters is 50kg barbed wire?
Barbed Wire 50kg/roll Length 1000m.
How much does fencing cost in Kenya?
Cost of installation of a fence on a 50 by 100 plot in Kenya For a standard 50 by 100 feet plot, the average costing is between Kshs 70,000 t0 Kshs 85,000 for supply, installation, testing and commissioning of electric fence.
What kind of steel is Ngombe barbed wire made out of?
Ngombe Barbed Wire is made from the finest high tensile steel. The Chainlink fence is manufactured from hot dipped galvanized wire. It is used in many different industries such as fencing, jewellery and of course farming. Gabions Baskets and Mattresses are available in a wide range of standard sizes.
How big is a piece of barbed wire?
The Barbed wire is manufactured using hot dipped galvanized wire. The nominal size of the wire is 16G (1.60mm) HIGH TENSILE for the line wire and 17G (1.44mm) soft for the barb wire, both having a tolerance of ±2.5%.
What is the tensile strength of a barb wire?
The nominal size of the wire is 16G (1.60mm) HIGH TENSILE for the line wire and 17G (1.44mm) soft for the barb wire, both having a tolerance of ±2.5%. The tensile strength of the line wire (16G) is above 900N/mm2 and that of the barb wire (17G) is between 350 and 550N/mm2.
How do you roll up old fence wires?
Pull the wire off the posts and leave it lieing about 3 feet from the posts. Start at one end get the wire started around the barrel. Then just roll the barrel along until you are done or the roll of wire is getting too big. Tuck the ends of the wires into the roll and slide it off the barrel.
Can barb wire be reused?
But can you recycle old wire fences and how do you do it? Fencing wire can be recycled at your nearest scrap yard. Use a magnet to divide it into ferrous metals (iron and steel), and non-ferrous metals (copper, aluminum, brass, bronze and stainless steel), and you can recycle both.
How far does a roll of barbed wire go?
1,320 feet
If you’re purchasing barbed wire, one roll is equal to 1,320 feet of fence, or 1/4 of a mile.
How much does it cost to barbed wire fence 1 acre?
Barbed Wire Fence Cost for 1 Acre Homeowners and ranchers can expect to pay about $3,762 to put up high-grade barbed wire around a single acre lot. Barbed wire usually costs around $1-2.50 per linear foot and average labor costs for installation are approximately $2 a foot.
What do you do with scraped barbed wire?
Fencing wire can be recycled at your nearest scrap yard. Use a magnet to divide it into ferrous metals (iron and steel), and non-ferrous metals (copper, aluminum, brass, bronze and stainless steel), and you can recycle both. Many scrap yards say if your fencing is over 50% iron they’ll take it.
Where can I get a wire roller to remove fences?
This fence removal and wire roller is American-made in Wishek, North Dakota. Rent it for $200 a day if within driving distance or buy it outright for $6800.00 (Price subject to change)to remove the fences around your livestock or property when you want to redesign your area.
What are the accessories for a wire roller?
The Hydra-Power Pack is an accessory component to the Hydraulic Wire Roller. It is designed to compliment and power the wire roller in all applications. It can also be used for other hydraulic power applications as well. The hydraulic post puller is just one accessory available for the hydraulic powered Wire Roller.
How does a level wind wire roller work?
Level Wind Wire Roller The Level-Wind wire spooler rolls wire evenly across the full width of the spool with a guide pulley that travels back and forth on a cross-cut threaded shaft. Wood spool adapters are available upon request, and the wire spoolers are hydraulic drive so that you can spool as well as unspool. Contact Us Quote Request
How does a roller reel wire Winder work?
Unlike PTO winders, this wire winder’s smooth hydraulic operation prevents even old, brittle wire from breaking. Reel is made of heavy gauge steel. Three light wires, retained by D-rings before winding, are tied off to hold roll tight. Roller reel splits easily and quickly with NO binding.