Why is my Kenmore fridge not getting cold?

Why is my Kenmore fridge not getting cold?

Check the condenser coils to determine if they are dirty—if the condenser coils are dirty, clean them. The condenser fan motor draws air though the condenser coils and over the compressor. If the condenser fan motor is not working properly, the refrigerator won’t cool properly.

Where is the defrost drain on a Kenmore Coldspot refrigerator?

#21 is your defrost drain pan, which is located in the back of the refrigerator, once you pull the refrigerator out from the wall, you will see if down by the compressor assembly #8.

How do you clean the coils on a Kenmore Coldspot refrigerator?

If the coils are exposed simply vacuum of any dust with the vacuum’s soft bristle attachment. Alternatively, if the coils are extremely grimy, use a rag dampened with degreaser or white vinegar. If the coils are not exposed, use a wrench or screwdriver to remove the screws.

What would cause a refrigerator to stop getting cold?

Vacuum the coils under or behind the fridge. Clogged coils can cause poor cooling. Check to make sure nothing is stuck in the condenser fan and that it spins freely (models with coils on the back won’t have a fan). To do this, unplug the fridge and pull it out.

How do you unclog a Kenmore refrigerator drain?

Fill a container with hot tap water. Use a turkey baster to force the hot tap water through the drain line until you melt any ice obstructing the line. You should hear water dripping into the condensation pan beneath the refrigerator once the ice melts.

What are the signs of a bad refrigerator compressor?

You’ll know that your compressor is bad when it starts making abnormal noises, the compressor overheats or not providing proper cooling, or when the fridge compressor clicks on and off too frequently.

How can you tell if refrigerator compressor is not working?

The best way to tell if something has gone wrong with the compressor is to pull the fridge slightly out from the wall and listen closely. If the motor is running with a slight humming sound but the temperature is above what its normal range should be, then it’s likely there could be a problem with the compressor.

How do you fix a refrigerator that won’t get cold?

What can cause a refrigerator to stop cooling?

Here are five other common reasons why your fridge may not be cooling, and how to address them.

  • Condenser coils are dusty.
  • The condenser fan is broken.
  • The evaporator fan is broken.
  • Evaporator coils are covered in frost.
  • Air inlet damper is broken.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top