Is Indesit a good brand for dishwashers?
If you’re after a simple and effective slimline dishwasher, the Indesit DSFO3T224ZUK gets most things right. Drying performance could be better, but the overall performance on offer here makes this slimline dishwasher a winner.
How do I know when my Indesit dishwasher is finished?
Start the cycle by pressing the START button; the indicator light will light up and remain lit in a fixed manner. The indicator light corresponding to the wash phase will switch on, signalling that the wash cycle has begun. 8. At the end of the wash cycle the END indicator light will switch on (fixed light).
How do I reset my Indesit dishwasher?
When the appliance is off, open the door and switch the dishwasher on. The dishwasher needs to be switched off. For 3 seconds, press button P. Press the Start/Pause button to switch the dishwasher on.
Who makes Indesit dishwashers?
Whirlpool Corporation
Indesit Company
| Indesit Headquarters in Fabriano, Italy | |
|---|---|
| Revenue | €2.9 billion (2012) |
| Number of employees | 16,000 (2012) |
| Parent | Whirlpool Corporation |
| Website | www.indesitcompany.com |
Are Indesit dishwashers safe?
Indesit are aware of a small number of cases of dishwashers where an electrical component can fail. This may lead to overheating and in rare cases a potential fire hazard.
Does my Indesit dishwasher need salt?
The appliance is equipped with a special softener that uses a salt specifically designed to eliminate lime and minerals from the water. Always use salt intended for use with dishwashers. The salt container is located beneath the lower rack and should be filled as follows: 1.
Why is the red light on my Indesit dishwasher?
There is a chance that your dishwasher will stop mid-cycle because of a water supply issue. The fill and recycling of the water could be affected by the malfunctioning pressure sensor.
Why is there water left in the bottom of my dishwasher?
Water in the bottom of the dishwasher results from clogs in the filter, garbage disposal, drain hose, drain pump, or air gap. When food or sediment build up within these systems, the dishwasher won’t drain properly. Locating the blockage and clearing the debris will solve the problem.
Why is the red light flashing on my Indesit dishwasher?
Indesit dishwasher lights flashing This indicates there may be a water supply issue and will cause your dishwasher to stop mid-cycle. Or the pressure sensor may be malfunctioning affecting the fill and recycling of the water. Your manual will provide you with a comprehensive flashing light guide.
Why is my Indesit dishwasher flashing red?
There is a chance that your dishwasher will stop mid-cycle because of a water supply issue. The fill and recycling of the water could be affected by the malfunctioning pressure sensor. A flashing light guide will be provided in your manual.
Where is the thermistor on an Indesit dishwasher?
Indesit family dishwashers usually have a thermistor mounted against the inner door near the detergent dispenser (it monitors water temperature & they sometimes become dislodged). If the pcb is in the base then as you say the interface cable will likely follow the main harness.
How much is a replacement PCB from Indesit?
A replacement PCB is only £49.99 from indesit but it looks like I need a smart card reader at £100 and a smart card at £13 to program the PCB in. So £163 for a DIY repair that might not work I might as well put that towards a new one just can’t believe they’re all breaking at the same time and at Christmas.
Is there a 5 year warranty on a dishwasher?
The dishwasher has a 5 year parts warranty but I’m guessing the labour makes it not worth using. They advertise a fixed quote repair thing starting from £80 where they will come and guarantee to fix it for the price they quote. I guess if I get nowhere it may be worth looking at?
What does a 3rd and 4th led mean on a dishwasher?
If you have the 3rd & 4th led’s on it indicates a communication error not two separate faults. Pull all the connections off the pcb, re-seat them, then check if the fault is cleared. If no-go then I suspect your pcb may be history, in which case you would indeed need a pcb + smartcard & card reader.