What is the twist rate of a Remington 788?
From some date in 1969 on forward Remington used a 1 in 9″ twist rate in the 788 243 Win.
What is the barrel twist on a Remington 788 in 22 250?
24″ barrel – 1 in 14″ twist.
Why is the Remington 788 so accurate?
It has a smaller ejection port than similar bolt-action rifles, and no bolt lug raceways. A rifle’s accuracy tends to increase slightly as the rigidity of the receiver increases, as this slightly reduces barrel deflection during firing. Thus the Remington 788 has the structural foundation to be a very accurate rifle.
How long is a Remington 788?
| Remington Model 788 | |
|---|---|
| Length | 41 in (100 cm) 43.6 in (111 cm) |
| Barrel length | 22 in (56 cm) 24 in (61 cm) |
| Caliber | .222 Remington .223 Remington .22-250 Remington .243 Winchester 6mm Remington 7mm-08 Remington .308 Winchester .30-30 Winchester .44 Rem Mag |
| Action | Bolt-action |
Is the Remington 783 a good rifle?
Fortunately, the Model 783 can shoot accurately—remarkably accurately. Despite the barrel showing all sorts of tooling marks, the rifle consistently hit three-shot groups at 100 yards within an inch. For a hunting rifle, that’s impressive accuracy.
How big is the barrel on a Remington 788?
Barrel lengths were 22 or 24 inches for standard rifles and 18.5 inches for carbines (.243, 7nm-08 and.308 calibers only). Left hand models were offered in 6mm Rem. and.308 Win. In my experience the 788 proved to be a very accurate rifle, a sentiment voiced by most 788 owners.
What was the twist rate on the Remington 788 243?
From some date in 1969 on forward Remington used a 1 in 9″ twist rate in the 788 243 Win. In 1967, when they first stared making the 788 243 Win, until they switched the twist rate in 1969, I believe Remington used the standard 1 in 10″ twist rate, that nearly every manufacturer producing 243 Win at the time used and most still use!
What should the barrel twist be on a Remington 243?
The 243 is not known for recoil so that would not be an issue. Barrel twist should be 1 in 9 or 1 in 10 for best all round performance and bullet selection. I agree with trying it first….I had a 788 carbine in .243 and it shot very well, you may get lucky!
Where are the safety lugs on a Remington 788?
The 788’s bolt lugs are located in front of the bolt handle and lock into the rear of the receiver. In addition, the lock time was unusually fast. The safety has two positions and is located on the right side of the receiver, behind the bolt handle.