What is Nitronic 30?
Nitronic 30® is a nitrogen-strengthened austenitic stainless steel developed for applications requiring good aqueous corrosion resistance combined with good resistance to abrasive and metal-to-metal wear.
What is Nitronic material?
Nitronic is the trade name for a collection of nitrogen-strengthened stainless steel alloys. They are austenitic stainless steels.
What is Nitronic 60 used for?
Applications using Nitronic 60 are valve stems, seats, and trim, fastening systems, screening, pins, bushings and roller bearings, pump shafts and rings. Other uses include wear plates, rails guides, and bridge pins.
Is Nitronic 60 magnetic?
Nitronic® 60 is characterized by low magnetic permeability even after severe cold working and at cryogenic temperatures.
Is nitronic magnetic?
What type of material is Nitronic 50?
austenitic premium stainless steel
Nitronic 50 is an austenitic premium stainless steel that provides better corrosion resistance than 300 or 400 series stainless. The combination of strength, superior corrosion resistance, and low magnetic permability makes this alloy a top choice for high-risk applications such as medical implantations.
Can Nitronic 60 be heat treated?
Electralloy Nitronic® 60 Stainless Steel is not hardenable by heat treatment. Annealing at 1950° F (1066° C) followed by water quenching is recommended.
How hard is Nitronic 60?
their hardness, where NITRONIC 60 is excellent in the annealed condition. These are minimum values for annealed bars up to and over 0.5” Diameter through 12” Bar. 17 8 8.0 4 0.14 Bal.
What kind of steel is Nitronic 30 made of?
Nitronic 30™ is a nitrogen strengthened and austenitic steel possessing high strength and corrosion resistance. This alloy can be readily welded and is non-magnetic even after rough forming operations. Nitronic 30™ is heated to 1093°C (2000°F), soaked and again heated to 1176°C (2150°F) and finally equalized before being forged.
What’s the temperature of Nitronic 30 in water?
Nitronic 30™ is soaked at 1038-1121°C (1900-2050°F) followed by rapid quenching in water or air. Nitronic 30™ is a nitrogen strengthened and austenitic steel possessing high strength and corrosion resistance. This alloy can be readily welded and is non-magnetic even after rough forming operations.
Which is the best definition of nitronic acid?
Definition of nitronic acid. : a tautomeric form of a nitroparaffin characterized by the isonitro group =NO(OH)
Which is the first grade of Nitronic alloys?
Nitronic alloys, as their name suggests, consist of a series of nitrogen-bearing austenitic stainless steels. The company Armco Steel before this registered trademark (trade name) becomes the property of AK Steel since 2000 developed the first grade, namely Nitronic 40, in 1961.