What is a water shut off curb key?
Get a Water Shut-Off Key It goes by a few names: water shut off tool, curb key or curb box key. Just a note in colder climates, shutting off water to the house is done inside, usually in the basement or the room closest to where the plumbing enters the home.
Who is responsible for curb stop valve?
The homeowner
Who owns the curb stop? The homeowner owns this valve structure and is responsible to repair or replace this valve if it will not function. The homeowner also is responsible to maintain the curb stop structure so that the curb stop is accessible.
Where is the water shut off valve outside my house?
Look for a rectangular or round cover that will be near the edge of your property, often between the curb and the sidewalk. Some water main valves are located along an alley, rather than the street. The cover may be metal or plastic, and it might say “water meter” to help with identification.
What is the purpose of a curb stop?
A curb stop is a water control valve, located on the property line of most private dwellings or commercial properties. Its purpose is to facilitate the isolation of water supply to the customer.
Where is my curb stop valve?
It’s almost a certainty that it’s located near the sidewalk (or street if you don’t have a sidewalk) at the front edge of your property. Once you find it, you can operate it if you have a key (or if the municipality has configured it in a way that is more convenient).
Who owns the water shut off valve?
050 “Shut-off Valves”, “All shut-off valves and service cocks are installed by the Public Works Department for the use of the City. Such shut-off valves shall not be operated by the customer, except in extreme emergency.
Where is my water shut off valve?
The main shut-off valve is usually found on the side of your house where the water comes in from the water meter. Commonly this would be in the garage, basement, or crawl space just inside the foundation, often near the front faucet. It’s called a gate valve and most types look like a wheel.
How do you install a water shut off valve?
How to Install a Water Shut Off Valve. First step, turn off the water to your house. Usually the water main will be in a basement or garage. Then drain your home at the lowest point. Usually this is a laundry tub, outdoor spigot, or kitchen faucet. Plan where you’ll place the shut off valve. Then cut copper pipe with an AutoCut tool.
How do you turn off a faucet valve?
Shut off the water supply to your outside faucet by turning the round knob clockwise until it stops turning. Pull the handle of a lever-style valve a quarter turn to the “Off” position. If the “Off” position is not marked on the faucet, pull the handle clockwise until it stops.
What is the curb stop wrench?
The curb end on the wrench goes directly onto the “T” Head of the curb stop. It can also be used on meter valves such as in a meter pit.