Where is OBD-II port location?

Where is OBD-II port location?

The OBD-II port is usually located under the dashboard, beneath the steering wheel column (1 – 3 in the diagram below). If not located beneath the steering column, look for the port in the areas indicated by numbers 4 – 9.

Where do I plug in OBD scanner?

Plug the standard OBD2 connector into the vehicle’s port located under the driver’s side of the dashboard. Turn on the car to power the scan tool or code reader.

Where is the OBD port on a 2008 Hyundai Elantra?

OBD connector location for Hyundai Elantra HD (2006 – 2011)

1. The OBD II socket is located above the pedals.
2. The OBD connector is above the pedals.
3. Here is the OBD port.

Where is OBD-II port on Hyundai Santa Fe?

The OBD-II port in a Honda Santa Fe is located to the left and below the steering wheel. If You are sitting in the driver’s seat, there is an access panel in front of Your right knee. Place Your fingers in the slot and pull out on the panel to remove it.

Does my car have a OBD2 port?

The OBD2 port location can vary depending on your car model. However, it is usually found within reach of the driver, underneath the steering wheel. Scroll down to see where the OBD2 port is located in your car! Additionally, you can also check the location of the OBD2 port in your car’s manual.

Does car have to be running to use OBD2 Scanner?

Always turn the ignition on or have the car running according to the instructions in the manual. Failure to do this might corrupt the scanning software. It’s also very important that you drive around with the manual for the specific scanner model that you’re using.

Where is the obd2 port on 2010 Hyundai Elantra?

OBD connector location for Hyundai Elantra MD (2010 – 2016)

1. The OBD II plus is located on the left of the steering wheel.
2. Remove the plastice cover.
3. Here is the OBD II connector.

Where is the OBD port on a 2007 Hyundai Elantra?