Which material is used for plinth protection?
A plinth protection usually is done by pouring an approximate 75 – 100 mm layer of plain cement concrete along the edge of the building. However, in cases of buildings that are well-finished, the plinth protection can be covered with a layer of paver blocks, gravels or even the surrounding lawn.
What is plinth protection and why is it required?
The protection of the plinth is necessary to prevent/reduce the infiltration of water in the soil that reaches the plinth wall and reaches the floor level by capillary action. The plinth board protection reduces the direct entry of water into the ground near the plinth beam wall.
What is the thickness of plinth?
Plinth should be at least 1 ft. above the ground level; • Provide a reinforced concrete band at plinth level, as shown in figure; • Minimum thickness of plinth band should be 3 to 4 inch and width should be equal to wall thickness. Main reinforcement should be 2 Nos. ½ inch diameter (4 sutar) bars.
What is the size of plinth beam?
The minimum size of the RCC plinth beam should not be less than 9 “x 9” (225 mm x 225 mm), as a general rule of thumb. The plinth beam size for a 1-story building is 9 “x 9” (225 mm x 225) mm) and is 9″x 12″ (225 mm x 300 mm) plinth beam sizes are used for 2 story (G + 1), 3 story (G + 2) and 4 story (G + 3) houses.
What is plinth height?
The level at which Substructure ends and superstructure starts is called Plinth level. The plinth height is in between 300mm – 450 mm from ground level. It is recommended that the minimum plinth height of 150 mm is adopted from the top of the road. Damp proof course (DPC) is laid on Plinth level.
Where is plinth protection provided?
Plinth protection is usually provided by placing a plain cement concrete layer of thickness about 75 to 100 mm along building edges. Plinth protection is provided to stop the infiltration of water in the soil reaches the plinth wall and floor level by capillary action resulting in dampness.
What is the height of plinth level?
Plinth Level:- The plinth height is in between 300mm – 450 mm from ground level. It is recommended that the minimum plinth height of 150 mm is adopted from the top of the road. Damp proof course (DPC) is laid on Plinth level.
What is the height of plinth beam?
Generally plinth beam height is taken as 1 feet to 2 feet (300mm to 600mm) height from ground level. Standard height of plinth beam is about 1.5feet (450mm) high from ground level for residential building and about 2feet (600mm) standard height taken for commercial building.