What is a Fast Ethernet interface?
Fast Ethernet is a local area network (LAN) transmission standard that provides 100 Mbit/s data transfer rate (100BASE-T). Workstations with Ethernet cards at 10 Mbps (10BASE-T) can connect to Fast Ethernet. (100 MB per second is a shared data rate; the input to each workstation is limited by 10 Mbps cards.)
How can you check to see if the Fast Ethernet interface on the router is connected to the Fast Ethernet interface on another networking device?
to the FastEthernet interface on another networking device? Check link lights. is up if there is a network connection. You suspect that a router’s LAN gateway is down.
Which command are used to show the status of Fast Ethernet port?
Use the show interfaces EXEC command to display statistics for all interfaces configured on the router or access server.
Which command could be used to view the configuration details of the Fast Ethernet port 0 0 interface?
show interfaces fastethernet command
To display the Fast Ethernet slots and ports, use the show interfaces fastethernet command.
What is a Fast Ethernet speed?
Fast Ethernet (IEEE 802.3u) has a maximum data rate of 100 Mbps and is the first Ethernet standard created specifically to operate in a star wired bus topology. Fast Ethernet standards for fiber include 100Base-FX, 100Base-SX, 100Base-BX10 and 100Base-LX10.
What is the difference between Ethernet and Fast Ethernet?
Gigabit Ethernet is the successor of Fast Ethernet. It can produces upto 1 Gbps speed. It is less popular than Fast Ethernet because its configuration and implementation is complicated than Fast Ethernet….Difference between Fast Ethernet and Gigabit Ethernet.
| S.NO | Fast Ethernet | Gigabit Ethernet |
|---|---|---|
| 1. | Fast Ethernet provides 100 Mbps speed. | Gigabit Ethernet offers 1 Gbps speed. |
What is exec mode password?
You use the enable password every time you move from User EXEC mode to Privileged EXEC mode. This password gives you security on your router, because Privileged EXEC mode is where all the dangerous commands are located, including access to Global Configuration mode.
What does Fa0 0 mean?
Fa0/0 is the FastEthernet interface on slot 0, port 0. Fa0/1 is the FastEthernet interface on slot 0, port 1. The addresses 192.168. 1.0/24 , 192.168. 0.0/24 , and 162.168.
What is show interface status?
The show ip interface command provides tons of useful information about the configuration and status of the IP protocol and its services, on all interfaces. The show ip interface brief command provides a quick status of the interfaces on the router, including their IP address, Layer 2 status, and Layer 3 status.
What is show IP ARP command?
Address Resolution Protocol (ARP) establishes correspondences between network-layer addresses (Layer 3) and LAN hardware addresses (Layer 2 Media Access Control [MAC] address). A record of each correspondence is kept in a cache on the router for a predetermined amount of time and then discarded.
How do I assign an IP address to Fast Ethernet?
To configure the Fast Ethernet port, we have to configure those interfaces which are physically connected to other network devices or routers. Now we are in fast Ethernet Interface mode (as shown (config-if), configuring the IP address on these interface e.g, 192.168. 1.1 and subnet mask 255.255. 255.0.
What is the meaning of Fa0 1?
Since Ethernet would historically been used for 10MBps interfaces, the “F” in my “F0/0” & “F0/1” diagram would seem to imply that the interface is a FastEthernet capable connection (10/100MBps).
How can I check the speed of my network interface card?
Press Windows + R and type “control panel”. Select “Network and Sharing Centre” from the options. Select “Change adapter settings”. Right Click on “Ethernet or Local Area Connection” and Click on “Status”. The Status window will show you the Speed of the Network Interface Card of your PC.
Which is the best definition of Fast Ethernet?
Ethernet networks can be categorized by their transmission speed, or the maximum speed that can be achieved over the network under ideal conditions. Fast Ethernet refers to Ethernet transmission that operates at 100 Mbps, which is the most commonly used Ethernet, providing enough bandwidth to support significant number of applications.
How to check the speed of my Ethernet connection?
How to Check the Speed of My Ethernet Connection 1 Open Settings. 2 Click on Network & Internet. 3 Click on Status. 4 Under the “Change your network settings” section, click the View your network properties option.Source: Windows Central 5 Under the “Properties” section, find the network adapter (Wi-Fi or Ethernet). See More….
What does 1 port Ethernet interface card do?
The 1-port Ethernet interface card provides the router with additional Ethernet interfaces that can use the functionality of the Cisco IOS software with any type of external broadband modem, such as a cable modem, or xDSL modem.