How much horsepower can a Ford 9 inch rear end handle?
Sure a 9 inch can handle 400+ horse in a car.
What vehicles have Ford 9 inch rear end?
Common applications
- 1957-1986 Ford F-100 & F-150.
- 1958-1960 Edsel (All series including Wagons)
- 1976-1980 Ford Granada.
- 1976-1979 Lincoln Versallies.
- 1957-1970 Ford Fairlane.
- 1957-1971 Ford Thunderbird.
- 1964 1/2-1973 Ford Mustang.
- 1966-1983 Ford Bronco.
How do I know if my Ford is a 9 inch posi?
Many enthusiasts will tell you to look for the two dimples in the rear cover to determine if the unit is a 9-inch, but this is not always true. Ford also had an 8-inch third-member rear end that had a dimpled cover. The best test of a 9-inch carrier is to try removing the two lower carrier case bolts.
Why is it called a 9 inch rear end?
The Ford 9-inch rear end, so named because of its 9-inch ring gear diameter, was manufactured from 1957 to 1987 by the Ford Motor Company and installed in some intermediate and most full-size Ford, Lincoln, and Mercury passenger cars, F-Series ½-ton trucks, and Econoline vans.
Why is the Ford 9 so good?
But what makes the Ford “better”? Besides an inherently large ring-gear diameter (bigger than all competitive passenger-car performance rearends, except the massively heavy and relatively rare 9-inch Dana 60), the Ford’s biggest strength advantage over competitive rearends is its greater hypoid distance.
How do I know if my rear end is Posi Trac?
If you can turn the wheel on your side while the other wheel is held still, the rear differential is not a Positraction unit. If you cannot turn the wheel on your side while the other person is holding their wheel in place, then the axle is a Positraction.
What is Trac Lok posi?
Trac-Lok/Posi-Trac – Clutch-type limited-slip (Posi), offered as original equipment in many GM and Ford performance cars, these units rely on clutches (friction plates) to transfer power to the wheels.
What does a 9 inch rear end do?
The Ford 9 inch housing is a semi-floating, drop-out axle. Because of their strength, you’ll see these 9 inch rear ends used in just about every make of car, truck, and customs. Ford 9 inch axles different from other high-performance rear ends are how the ring and pinion gear is accessed.
What is the rear end of a strange Ford 9 inch?
Strange has increased the strength of the Ford 9 inch several different ways. The Strange 9 inch rear ends are constructed .141” mild steel with a heavy duty .282” face plate. The housing is slotted along the front to allow complete and secure welding for the housing tubes.
How big are Ford 9 in.axle housings?
Axle Housings, Fabricated Ford 9 in. Housings, Chromoly, Natural, 3.500 in. Axle Tube Diameter, 48.000 in. Overall Length, Ford 9 in., Kit Part Number: RHC-16-0004-48 ( 2 )
When did the Ford 9 inch rear axle come out?
The Ford 9 inch rear end. Ford’s 9 inch rear axle was produced from 1957 through 1986. At one time or another, it was installed in nearly every Ford passenger car and truck. In racing and hot rodding today, you’ll find these rear ends and their aftermarket descendants in just about everything—not just Fords.