What is a doubler in distilling?
In American whiskey distilling, a type of pot still used for the second round of distillation. A doubler receives spirit that has already been cooled into a liquid, whereas a thumper receives vapor.
How does a doubler work?
In a doubler, the vapor off the column still is condensed back into liquid and this is run through the pot still. You’ll see that the beer goes into the still at Plate 15, the new-make spirit is condensed and sent to the pot still (doubler), then recondensed before entering the High Wine Tank at the end.
What is the basic principle of distillation experiment?
In simple distillation, a mixture is heated to change the most volatile component from a liquid into vapor. The vapor rises and passes into a condenser. Usually, the condenser is cooled (e.g., by running cold water around it) to promote condensation of the vapor, which is collected.
What is the purpose of a distillation experiment?
Distillation for Boiling Point Determination Distillation is used to purify a compound by separating it from a non-volatile or less-volatile material. Because different compounds often have different boiling points, the components often separate from a mixture when the mixture is distilled.
Is a doubler the same as a thumper?
Another nickname for the thumper is “doubler,” but don’t let that fool you: Using a Thumper Still doesn’t DOUBLE the purity of your distillate, although it does increase it. The term “doubler” is in reference to the fact that using a Thumper Still is similar to double distilling.
Do I need a thump keg?
An ordinary pot still, without a thump keg, is capable of distilling a wash to only a “low wine”, which will be about 40-50% alcohol. Many shiners in fact prefer to use a wooden barrel for the thump keg, precisely because it loses less of this useful heat than would a metal one.
What’s a doubler?
1. doubler – an electronic device that doubles the voltage or the frequency of an input signal. electronic device – a device that accomplishes its purpose electronically. Based on WordNet 3.0, Farlex clipart collection.
What are the 3 steps of distillation?
The overall process of alcohol distillation can be summed up into 3 parts: Fermentation, Distillation, and Finishing.
How does the distillation process work?
Distillation heats untreated water until the water reaches its relatively low boiling point and begins to vaporize. Once the water has vaporized, that vapor is then funneled into a condenser. Removed from the heat source, the water cools and reverts back to its liquid form and flows into a receiving container.
Why is an ice bath used in distillation?
During the course of the distillation, the water vapor which distilled was initially at the temperature of the solution. Suspending a thermometer above this solution will record the temperature of the escaping vapor. This is why the distillate is frequently chilled in an ice bath during the distillation.
How many heads is 5 gallons of mash?
For the instant gratification seekers in the crowd, here’s the short answer: A 1 gallon run will yield 3-6 cups of alcohol. A 5 gallon run will yield 1-2 gallons of alcohol. A 8 gallon run will yield 1.5-3 gallons of alcohol.
Can you put fruit in a thump keg?
This is the thumper liquid and it is meant to COOL the vapor that comes in from your pot still. If you want to infuse extra flavor into your moonshine, you can also add fruits, herbs, or spices at this stage. You can choose to add fruit peel, herbs, spices, and mashed ripe fruit directly into your thumper keg.
What is the reverse process of double distillation?
Repeating the process on the collected liquid to improve the purity of the product is called double distillation. Although the term is most commonly applied to liquids, the reverse process can be used to separate gases by liquefying components using changes in temperature and/or pressure.
How is distillation used to separate a mixture?
Distillation Definition. Distillation is a widely used method for separating mixtures based on differences in the conditions required to change the phase of components of the mixture. To separate a mixture of liquids, the liquid can be heated to force components, which have different boiling points, into the gas phase.
How is the fractionating column used in distillation?
A fractionating column is used to separate the components used a series of distillations called rectification. In fractional distillation, a mixture is heated so vapor rises and enters the fractionating column. As the vapor cools, it condenses on the packing material of the column.
How is vapor collected in a simple distillation?
Simple Distillation. In simple distillation, a mixture is heated to change the most volatile component from a liquid into vapor. The vapor rises and passes into a condenser. Usually, the condenser is cooled (e.g., by running cold water around it) to promote condensation of the vapor, which is collected.