What are the safety precautions in using a hammer drill?
Ensure that T-handle is securely attached when using larger tools and drill bits. Do not use if faulty or out of test. Electric shock, etc Adopt comfortable posture when using drills – avoid bending where possible. Use leg or load support when using large drill to drill into walls, etc.
What PPE do you need for a hammer drill?
Use the following Personal Protective Equipment when using these machines: ∎ Safety glasses or a face shield ∎ Gloves ∎ Dust mask or Respirator (if drilling dust producing material).
How do you maintain a rotary hammer?
Wipe off any dirt and debris from the end of the bit that goes into the hammer to prevent tool holder failure and jamming. Grease the bit shank every time you change bits to prevent premature wear of the bit holder. Use manufacturer-recommended grease and follow weight and viscosity guidelines.
What are the hazards of a hammer drill?
Hammer safety warnings Exposure to noise can cause hearing loss. Use auxiliary handle(s), if supplied with the tool. Loss of control can cause personal injury. Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring or its own cord.
What are the main causes of accidents while using a hammer?
Hammers are designed according to the intended purpose. Select a hammer that is comfortable for you and that is the proper size and weight for the job. Misuse can cause the striking face to chip, possibly causing a serious injury.
What personal protective equipment PPE should you wear when using portable electric tools?
Respiratory Protection
- Disposable Respirators. Disposable respirators (also known as dust masks) are paper-like masks that fit around your nose and mouth.
- Half-Face Respirators.
- Earplugs.
- Earmuffs.
- Safety Glasses.
- Safety Goggles.
- Face Shields.
- Work Gloves.
What kind of PPE should we use when working with power tools?
Electric power operated tools must be double-insulated or properly grounded. Appropriate personal protective equipment, such as safety glasses with side shields, face shields, leather work gloves, or leather work boots must be worn when using hand tools.
How do you protect a hammer?
Wear safety glasses or goggles, or a face shield (with safety glasses or goggles). Strike a hammer blow squarely with the striking face parallel to the surface being struck. Always avoid glancing blows and over and under strikes. (Hammers with bevelled faces are less likely to chip or spall.)
How should the hammer for more control?
Hold the hammer like you’re shaking hands with somebody. When you need more control over the hammer, like when you’re starting a nail, grip the hammer closer to the hammer head. When you need power, grip the hammer near the handle’s end.
When to not use a rotary hammer drill?
Secure the material being worked on, using clamps, etc., if it is not already fixed in place. Never force the rotary hammer, switch to a tool that is better designed for the job you are doing. Do not use the hammer drill if the trigger switch does not turn the tool on and off properly. Only use accessories that are recommended by the manufacturer.
What do you need to know about hammer safety?
A hammer is an impact tool – a tool used to drive items into material by way of manual or powered force – and, according to the National Safety Council, is a common source of injury. During safety inspections, supervisors need to be watchful that employees are not being careless with hammers.
What should the handle be on a hammer?
All hammers should have a securely fitted handle suited to the type of head being used, the council notes. The handle, regardless of what it is made of, should be oil-free, shaped to fit the hand, and the correct size and length for the task.
Which is more likely to chip a hammer?
The more square the corners of the hammer, the easier it is to chip. The harder the hammer is swung, the more likely it is to be chipped. The harder an object is struck, the more the chance of chipping increases. The greater the angles between the surface of an object and the hammer face, the higher the chances of chipping.