What size is 5×2 timber in MM?

What size is 5×2 timber in MM?

44x122mm
5×2 Rough Sawn Timber (44x122mm)

What size is 5 by 2 timber?

47 x 125mm
47 x 125mm (5 x 2) Tanalised Carcassing Timber C24 (4.8m) | Nationwide Supplies: Builders & Plumbers.

What is 4×2 timber in MM?

44mm x 95mm
4×2 Rough Sawn Timber – 44mm x 95mm.

Is C24 timber pressure treated?

It has eased edges for faster handling on site. We stock structurally graded C24 which complies with EN14081-2 and is pressure preservative treated with Tanalith E for a durable finish. Available in a range of finished sizes and lengths.

Can you get 5X2 timber?

47X125mm (5X2″) Sawn Treated, C24 Graded & Regularised Timber. 47x125mm is also commonly known as 5x2inch, although the finished size is 47x120mm it is still commonly known as 47x125mm to the trade.

What is CLS timber?

CLS Timber – “Canadian Lumber Size” or CLS is finished on all sides giving a smaller cross-section than traditional sawn timber. Originating in the Canadian market, hence the name it is mainly used for timber frame home construction and for internal and partition walls.

What is C24 timber used for?

The three most common uses for C24 deck boards are: Balconies – when trying to keep the deck sections thin to match up with door levels. Bridges – to optimise the use of large beams or to use fewer beams in the structure. Aesthetics – Fewer knots in the wood can be preferable for projects where appearance is important.

Can I use 4×2 for decking frame?

4 x 2 Timber Rail / Joist These decking joists are the most common sized framing timber for decking. They provide a solid structure for fixing your decking boards too. When making your decking frame you should use a 400mm spacing between your timber joists.

What is a 2×4 in the UK?

I know from reading around that size wise this would roughly equate to the UK’s 44 x 96 and 25 x 44. One weird thing about dimensional lumber is that the size (ex. 2×4) is nominal, meaning that it’s only the approximate size. For example, a 2×4 is actually 1.5″ x 3.5″ (38mm x 89mm) in cross-section.

Can I use C24 timber outside?

Treated timber is suitable to be used externally and is suitable for wet areas or areas where the timber will be coming into contact with the ground.

Is C24 timber suitable for decking?

C24-graded decking boards are typically used where higher loads or wider spans are required. The main advantages of using C24-graded deck boards are that a wider rafter centre can be used in the same section as a board graded to C16, and a smaller deck board can be used on the same centres.