Can you disconnect a gas fireplace?
With all of the connections holding a gas fireplace in place and the gas and/or electrical supplies disconnected, a gas fireplace can be removed. Gas fireplaces will typically come out as one unit, but for natural vent models that have an open front it may be best to remove any loose objects first.
Does a gas fireplace need a switch?
Some gas fireplaces will require you to open a gas valve using a fireplace key. If you don’t have a key, the unit might have an ignition switch on the control panel. You can use a long match or lighter as well. If your unit does have a fireplace key, remove the front cover of the fireplace so you can access the burner.
Why are there 2 switches for my gas fireplace?
The pilot flame takes a brief time period to light the main burner. That delay is normal. Pilot flame is heating a safety element which actually allows the gas to flow to the burner. No pilot flame no burner gas.
What is the wall switch for on a gas fireplace?
Many gas fireplaces come equipped with a wall switch control panel for activating the unit and adjusting the level of the flame. Simply push the “On” button and the pilot should ignite.
Why does my gas fireplace have 2 switches?
May be for powering a wall recepticule. Common to find two wall switches in an electrical box. One for the fireplace and one for a recepticule in a wall outlet. Or the second switch does power the unit.
How much would it cost to remove a gas fireplace?
Before you call someone to start knocking down your mantle, read our guide to get an idea of how much this project will cost. On average, the cost to remove a gas fireplace is between $600 and $2,500, though the price will be higher if you want to remove the breast, stack, and chimney flue as well.
How do you remove a gas fireplace from the wall?
Start by shutting off the gas to your home at the main valve so there’s no chance of a leak. Take a crowbar and remove the trim around the insert. When you can access the gas line, remove it as well. Then, carefully wiggle the insert out of the fireplace and remove it.
Why does my gas fireplace have a switch?
Why is there a light switch next to my gas fireplace?
Question: There are two wall switches on the wall beside the gas fireplace. The top switch ignites the flame.
Do all gas fireplaces have a wall switch?
How to bypass spill switch on gas fireplace?
Bypass spill switch with a jumper wire as shown. If the unit starts, replace the spill switch. DO NOT LEAVE BY PASSED IN. Check spill switch operation on B-vented models only SEE PAGE 10 FIGURE 9. Check the “ON-OFF” switch and thermostat for proper operation. Use a jumper wire.
What should I do if my electric fireplace switch is broken?
Use a small screwdriver to remove the screws on the top and bottom of the cover plate on the current switch. Remove the plate. Now, remove the screws that affix the old switch to the electrical box.
How do you install a wall switch on a gas fireplace?
Turn the control switch on the gas fireplace to the “Off” position. Choose a convenient mounting location for the wall switch in accordance with the fireplace manufacturer’s instructions. Place the included gang-box template on the wall in the chosen location. Trace the template with a pencil and cut along the traced line with a drywall saw.
How to replace a gas fireplace ignition system?
A) IGNITION SYSTEM Make sure that wires are not broken, frayed and that all connections are tight at both the piezo ignitor and electrode. Replace with only manufactures parts Make sure that ceramic on the electrode is not broken. Carefully try to spin the porcelain. IF IT DOES, replace electrode.