What does an oil interceptor do?
Oil interceptors separate oily waste from interior drainage systems or exterior run-off areas, preventing environmentally damaging and potentially dangerous oil substances from entering septic fields, run-off areas, and wastewater treatment facilities.
How do oil interceptors work?
Basically, oil interceptors work by separating the oil from the water. They function as a trap for rainwater runoff from different sources where oil is present on the surface, and prevents the oil from polluting the soil and the water courses.
What is the difference between oil and grease interceptor?
Grease interceptors have a primary function of removing fatty solids from wastewater. They are most often used in commercial kitchens or similar applications. Oil separators have a primary function of removing liquid oil from wastewater.
What is a sand oil interceptor?
What is a Sand/Oil Interceptor? Sand/oil interceptors are large capacity, underground vaults installed between sewer drains and the Central Contra Costa Sanitary District’s main sewer line. These vaults are designed with baffles and pipes to trap sediments and retain floating oils.
How many types of oil interceptors are there?
There are five main types of interceptors: grease, oil, lint, sand and solids. Each of them requires different considerations for sizing, operation and maintenance.
What is a manhole interceptor?
What are interceptors? An interceptor is an essential installation, as it prevents common oils – such as those that could seep from machinery or vehicles – from getting into and polluting the main drainage system. The interceptor area holds pollutants until they can be removed manually later.
Do grease interceptors need to be vented?
Grease interceptors must have a vented waste, sized in accordance with code requirements for venting traps, to retain a water seal and to prevent siphoning. One interceptor to serve multiple fixtures is recommended only where fixtures are located close together.
Do I need a grease interceptor?
A grease trap or grease interceptor is required for any facility that pushes wastewater with fats, oils, or grease into the sewage system.
Can a oil interceptor regulate the flow of water?
An oil interceptor correctly designed to separate oil and light density substances from wastewater, will not by itself govern or regulate the flow of water through it at all times to sufficiently assure the flotation separation of the entrained substances which are to be intercepted at maximum efficiency.
How are oil separators and interceptors protect the environment?
Oil Interceptors and Oil Separators protect the environment by preventing oils and sediment from entering the municipal waste water system. They are typically used by car washes, auto repair shops, parking garage, machine shops and industrial facilities.
How does Zurn oil and grease interceptors work?
Zurn oil interceptors are designed similar to the grease interceptors. Both work on the principle that oils are lighter than water and thus gravity causes the oil to rise and the water to fall. Zurn oil interceptors come equipped with a removable sediment bucket on the inlet to trap stones, grit, and other substances.
How big is a SD floor drain separator?
It is then forced through two sets of filters before exiting through the outlet. Interceptors Direct stocks five (5) SD combination floor drain separators. The smallest unit has a 12-pound greasy sludge capacity and a 3.5 gallon liquid holding capacity.