What is Hunter EC?

What is Hunter EC?

The EC was Hunter’s entry-level residential controller that stopped shipping in 2006. The EC was replaced by X-Core, which was developed as a more efficient and versatile solution for the same residential applications. The X-Core is recommended as the replacement for current EC owners.

How do I reset my Hunter EC controller?

Resetting the EC controller

1. Press and hold down the , and buttons.
2. Press and release the RESET button in the lower wiring compartment.
3. Wait 2 seconds and release the , and buttons. The display should now show 12:00a. m.
4. All the memory has been cleared and the controller may now be reprogrammed.

How do I reset my hunter water system?

Resetting a Hunter X-Core is easy. To reset the irrigation controller, all you need to do is press the negative, the hand and the program keys at the same time, then use a small tool to press in the small reset button on the side of your controller. A small screwdriver or a pen will do the trick.

Why is my controller not starting the watering cycle?

Check for Rain Sensor operation Look at the “Sensor” terminals on the controller. By sliding the Rain Sensor switch to the “Bypass” position you can over-ride the active sensor. Look at the controller display, if the “Sensor OFF” message is displayed, the sensor is activated and inhibiting the watering cycles.

How do I program my hunter sprinkler system?

How to Program Your Hunter X-Core Sprinkler System

1. Step 1: Set The Current Time. First, you will want to ensure that the current time is correct.
2. Step 2: Set the Start Times. Next, turn the dial to “Start Times”.
3. Step 3: Set the Run Time.
4. Step 4: Set the Watering Days.
5. Step 5: Test Coverage.
6. Step 6: Finished!

What does no AC mean on Hunter sprinkler?

Pro-C – “NO AC” on Display The “NO AC” display is a diagnostic message telling you that the controller has stopped receiving AC power. The controller is running on the power supplied by the backup battery. Check the power source by plugging a lamp or radio into the wall outlet to verify there is power at the outlet.Ram. 5, 1440 AH

Why is my irrigation system not working?

One of the most common problems is a clogged nozzle. Other times the nozzle may be irreversibly damaged, so a new one is needed. If cleaning or replacing the nozzle doesn’t fix the problem, the next place to look is at the actual head. In these cases, your sprinklers might drip water instead of spraying it.Dhuʻl-H. 4, 1441 AH

Why does my hunter sprinkler system keep running?

A common reason for a controller to repeat a cycle is too many programmed start times. Only one start time per active program is required, a second start time will cycle the program an additional time. NOTE: In the Start Times dial position, the numbers 1-4 do not represent stations.Ram. 12, 1440 AH

How do you program a hunter sprinkler controller?

Why is my Hunter sprinkler not running?

The most common reason your sprinklers are not watering is because the rain sensor is active. Do you have a rain sensor on your sprinkler system? If so, slide your sensor bypass switch into the “BYPASS” position (on an SRC, turn the dial into the RUN (Bypass Sensor position).

Why isn’t my hunter sprinkler system working?

If your controller shows irrigation running (Flashing Sprinkler Icon), and your sprinklers are not working, you may have a wiring problem at the valves or the irrigation water supply has been shut down. Check the wiring connections at the master valves for loose or corroded connections, or a bad solenoid.

How does a hunter EC pump start relay work?

A pump start relay is a device that watering when weather conditions dictate. WATERING SCHEDULE FORM HUNTER EC PROGRAM A PROGRAM B PROGRAM C DAY OF THE WEEK INTERVAL (Choose 1 to 31 days) PROGRAM START TIMES LOCATION STATION RUN TIME STATION RUN TIME STATION RUN TIME STATION NOTES:… The time and day have now been set.

How long does a hunter EC battery last?

Even without a 9-volt battery the EC will keep track of time for up to 1 month and System Off – Allows user to discontinue all programs and stop all retain the program indefinitely in the event of a power outage.

What are the features of a hunter sprinkler system?

The Hunter system offers a unique advantage, thanks to its innovative Smart Irrigation controller features. You can easily control and automate your sprinklers through the control system for automatic turn-on and shut-off, as well as scheduled watering times. This is based on the Hunter Run Time Calculator. What is the Hunter Run Time Calculator?

Do you need a conduit cover for a hunter EC?

Make sure that there is a sufficient length of conduit so it enters the NOTE: The indoor EC is not water or weather resistant, conduit cover. There are two small notches on and must be installed indoors or in a protected area.