How do I set my Timex Expedition watch?

How do I set my Timex Expedition watch?

Locate the crown on your analog expedition watch.

1. Pulling the crown all the way out will allow you to adjust the time.
2. Pulling the crown half way out to the middle position will allow you to adjust the date.
3. Pushing the crown back in will restart the watch, starting from the time and date you have set it to.

Where is the reset button on a Timex Expedition watch?

Hold down the “Set” button on the upper-left edge of the watch to start setting the time. The time zone field flashes. Push the “Start/Split” or “Stop/Reset “ buttons on the upper-right and lower-right edge of the watch respectively to choose the first or second time zone.

How do you reset a Timex Expedition Chronograph?

TO ADJUST THE CHRONOGRAPH HANDS:

1. 1) PULL out CROWN to “C” position. 2) PRESS pusher “A” intermittently until the seconds.
2. sweep hand resets to “0” or 12-hr. position.
3. the 12 o’clock eye reset to “0” or 12-hr position.
4. NOTE: Make sure that the chronograph is stopped and reset before adjusting.

How do you set a Timex Indiglo digital watch?

How to Set Dial Indiglo Watches. Pinch the winding knob on the right side of the watch between your thumb and forefinger. Pull the knob out from the watch slowly until it clicks into the first position. Turn the knob to move the hour and minute hand to set the time.

How do I start my Timex watch?

Press & release the START/SPLIT button (on the right on the face). The chronograph will begin to run. Laps and splits should say the same thing, since you are on your first lap. To indicate the beginning of the next lap, press & release the START/SPLIT button again.

How do you reset a Timex watch?

1. Tap the watch screen to bring up your apps.
2. Swipe left, then tap Settings.
3. Swipe down and tap and tap Factory Reset.
4. Enter Code (last 4 digits of IMEI), then tap YES.

How do you set a Timex Expedition?

The Timex Expedition is a type of digital, outdoor watch that features a stopwatch, alarm clock, and timer. There are twenty-four different types of Timex Expedition watches, but they are all set in a very similar way. Setting your Timex Expedition is done by pressing a series of button combinations on the watch itself.

How do you set the time on a Timex Expedition?

Press the “Start/Split” button to increase the time or the “Stop/Reset” button to decrease the time. Press the “Set” button again to set the time. Pull out the crown of the Expedition-E Instruments or Expedition Dive watch.

How do you set the time on a Timex classic digital watch?

To set the time on a digital Timex watch. Press and hold the “Set” button for two seconds. The “Set” button is on the lower right side. Press the “Date Advance” button on the upper right side. This will reset the seconds.

How do you set time on Timex Ironman Triathlon?

Use the “Split/Reset” button to reach the desired hour. Use the same procedure to set the minutes on your watch. Repeat to set the month, date and day of the week on your Timex Triathlon. When you’re finished setting the time and date, press the “Set” button.