Where is the neutral safety switch located on a 2002?
The 2002 Dodge Durango neutral safety switch is located on the top of the transmission. But why is a neutral safety switch so important. Well the neutral safety switch is a safety device that only allows You to start Your engine when the automatic transmission is in either Park or Neutral.
What are the signs of a bad neutral safety switch?
Symptoms of a Bad or Failing Neutral Safety Switch
- Engine will not crank in park but cranks in neutral.
- Engine will not crank in neutral but cranks in park.
- Engine does not crank at all, regardless of the transmission gear.
- Engine cranks in any gear.
Where is the neutral safety switch located?
The neutral safety switch is mounted to the transmission (or transaxle) by two or three 10mm or 12mm bolts. The shifter cable/linkage is attached to the switch and it has a single electrical connector plugged into it.
What happens with a bad neutral safety switch?
A faulty neutral safety switch can cause the car to “lug down” with jarring shifting. It’s also possible for a car to stall and refuse to restart. The neutral safety switch’s job is to prevent your vehicle from rolling backward when you’re parked and your foot isn’t on the gas.
Can I bypass my neutral safety switch?
The neutral safety switch is built into the transmission selector switch, and the power from the ignition switch goes straight through the switch when you are in park and neutral to the starter motor solenoid. So while it is possible to do this bypass, this could be dangerous and not worth the safety hazard.
Will a car start with a bad neutral safety switch?
If your neutral safety switch is having serious electrical problems, then your engine will not crank in park or neutral. The starter relay relies on the switch for receiving power. If it can’t receive this power, then the starter motor will not be able to crank the engine.
Will a car crank with a bad neutral safety switch?
Yes, a faulty neutral safety switch can cause shifting issues if it’s not working anymore. And in other cases, your vehicle won’t start, among other problems.
How do you check a neutral safety switch?
Move the shifter to the “Park” position so that your vehicle doesn’t move, and try to start. If the engine didn’t crank, then push down the brake and try to start in “Neutral.” This way you are bypassing the “Park” position in the switch. If the engine starts in “Neutral,” the switch is bad.