Can you use Sikkens on teak?
Sikkens Cetol Marine Natural Teak Finish can be used on exterior and interior hardwoods such as teak, mahogany, and oak. Sikkens Cetol Marine products should only be applied above the waterline. Specifications: Finish: Satin.
How do you use Cetol Natural teak?
bristle brush, smoothly, in the direction of the grain. Keep a wet edge to prevent lap marks and thoroughly saturate end grains where possible. Apply 3 coats of Cetol® Marine Natural Teak. Always allow 24 hours drying time in between coats.
How long does Cetol Marine last?
If Cetol is kept under these conditions, one can expect a typical shelf life of three years. A simple trick to help maintain the Cetol product is to prevent it from oxidizing by reducing the amount of air in the can, the same as you would for any other air dry product.
Is sikkens a varnish?
A medium build, solvent-borne interior varnish that is resistant to knocks, spills and abrasion. A highly durable, high build, solvent-borne opaque that provides a satin paint-like finish on exterior surfaces.
What is teak sealer?
Teak sealer, on the other hand, gives a layer of UV protection to teak wood furniture. It makes a barrier to prevent the oxidation of the outer layer of wood, so that your teak furniture won’t turn gray. A teak sealer only needs to be reapplied about once a year, so this is one large advantage it has over teak oil.
What is the difference between cetol and varnish?
Cetol Marine can be applied anywhere that you would use varnish, but is particularly suitable for areas that endure hard use—grabrails, swim platforms and ladders, or the cockpit sole, where it produces a surprisingly durable and non-slip finish. Unlike varnish there is no need to sand between coats.
Can you varnish teak?
Oil-based polyurethane yacht varnish is the recommended type for outdoor teak, as it sets firm and gives a completely waterproof and weatherproof coating which will last for many a long year. Use a soft bristle brush to apply the varnish, always stroking with the grain of the wood.
Is sikkens oil or water based?
Sikkens Proluxe Cetol SRD is a one coat, oil-based, translucent exterior wood finish. Sikkens Proluxe Cetol SRD was created for use on a variety of wood surfaces including siding, rails, decks, and logs.
Is sikkens Rubbol water based?
Sikkens Rubbol WF 318 Opaque is a highly durable waterbased interior and exterior wood coating with a semi-gloss finish.
Is Sikkens stain good?
It boasts excellent performance and durability, with protection lasting up to two to three years when applied and maintained as directed by the manufacturer. Sikkens products have the most recommendations from consumers and professionals who have used them, which is why Sikkens appears at the top.
How do you maintain sikkens?
Maintenance is cleaning the surface gently with bleach, TSP, and water. After that, another coat of stain or clear coat should be applied to replenish UV absorbers, blockers, resin, and pigment. If the color is ok, the clear should be applied in order not to overly darken the appearance.
How to apply Sikkens cetol marine natural teak finish?
Sikkens Cetol Marine products should only be applied above the waterline. Application: Use a long haired natural bristle brush. Apply in direction of grain. Application Do’s: Apply when temperature is between 50°F and 95°F. Saturate all end grains. Apply liberal coats and maintain a wet edge.
Which is the best finish for teak wood?
Protect your investment with Sikkens Cetol Marine Natural Teak Finish. Cetol Marine’s Natural Teak formula actually enhances the natural wood grain, while its specially formulated UV- absorbing technology provides added protection with a durable, translucent, and protective wood finish.
What kind of finish does Interlux Sikkens use?
Interlux Sikkens Cetol Marine Light Wood Finish Interlux Sikkens Cetol Marine Light with Next Wave UV-absorbing technology is a durable translucent protective wood finish for use above the waterline…
What can Sikkens wood coatings be used for?
Welcome to the Sikkens Wood Coatings website. For over 225 years we have stood for quality of coating systems in the Wood Products sector. Our products are used outdoors for facades, wood windows and doors as well as other dimensionally stable or unstable applications.