Why is water coming out of the back of my rainbow?
There are several causes for this, such as a hole in a hose, or a leak in one of the seals or valves on the machine. Each of the valves, seals, and hoses should be checked to ensure that there is no damage or leak. If there is a leak or damage, a replacement can be ordered and quickly installed to resolve the issue.
Can you use a Rainbow vacuum to pick up water?
You can use Rainbow Vacuums to pick up wet spills and water.
Why is my Rainbow vacuum not suctioning?
Look for any dirt that could have impeded the suction. If your unit has a rotating brush, remove it to gain better access to the opening. Also, always check the point where the hose and vacuum connect. A loose connection here will compromise the airflow and reduce the suction.
Do Rainbow vacuums have lifetime warranty?
What is covered under the Rainbow warranty? Rexair provides to its independent Authorized Rainbow Distributors, and only to them, a written four (4) year warranty on the Rainbow SRX Cleaning System and attached accessories and a ten (10) year warranty on the vacuum cleaner motor/electronic controller.
How do you suck up water with a vacuum cleaner?
Vacuum the Water Hold it in place until the water under and around it is depleted. Progressively move the nozzle to a new section until all of the water is gone. Turn on the vacuum and place the nozzle on top of the water. Wet/dry vacuums can vacuum up large quantities of standing water very quickly.
Where do you dump water from a Rainbow vacuum?
Therefore the safest method of emptying Rainbow vacuums by far, and the old staple of Rexair vacuum salesmen of years gone by, “Get the rubbish out the house!” You can drill a few holes in a bucket and dump the water pan into it. Once everything is dry, you can clean the bucket and throw the remains in the trash.
Where is the reset button on a Rainbow vacuum?
It is at the bottom of the vacuum.
Where do you fill up the Rainbow vacuum?
Fill the Rainbow up to the middle of the water basin where the filling mark is. The same level is flush with water basin middle dome. Use the two side locks the Rainbow vacuum has in order to lock the water tank in place. If you do not lock the water tank correctly the Rainbow suction can leak therefore reducing the efficiency of the Rainbow.
What makes a Rainbow vacuum different from other vacuums?
Rainbow brand vacuums are sold only by authorized dealers and distributors. They work differently from their competitors by placing sucked-up debris into a water basin instead of a traditional canister or bag.
What should I do if my Rainbow vacuum is making noise?
Check the connection of the hose to the power unit. Disconnect the hose by pressing the buttons on opposite sides. Reconnect the hose and continue vacuuming. Check the HEPA filter for clogs; when properly cleaned, the filter will help reduce the noise production of the unit.
What to do if your rainbow goes off by itself?
More water than normal can make the rainbow go off by itself to prevent water spills. Fill the Rainbow up to the middle of the water basin where the filling mark is. The same level is flush with water basin middle dome. Use the two side locks the Rainbow vacuum has in order to lock the water tank in place.