Can you add heads to track lighting?
You can change out the heads to better suit your needs, as long as the fixture and the track are compatible. Lights can easily be moved to adjust the lighting based on changes in your living space, from furniture position, artwork placement, or room setup.
Are track lighting Heads universal?
Whether or not the fixtures are interchangeable depends on the system. In short, there are a few types—such as J, H, and L track lighting. Most units are interchangeable if they are in the same track category.
What are the different types of tracks for track lighting?
There are three types of track: H, J, and L. The terms come from the manufacturers that set the standards for each type: Halo, Juno, and Lightolier. The different types do have some similarities.
How many heads can you put on a track light?
A general track lighting rule is to add no more than one fixture per foot.
What is the difference between track lighting and monorail lighting?
Functionally, this means that track lighting is essentially an extension of your home’s electrical circuit. Monorail lighting is its own low-voltage system dictated by the transformer used. Monorail is a more updated, design-oriented system, and usually has more decorative options for the light fixtures.
What is the difference between J track and H track lighting?
To identify a track fixture, if it has three contacts, it is likely an “H” type. If the contact-tips are 1 inch apart, it is likely a “J” type, but if they are 7/8 inch apart, the track is likely an “L” type.
Are all track lighting tracks the same?
It’s important to keep in mind that not all track lights (fixtures) fit all track types. The three standards were developed by the early manufacturers of track lighting (Halo, Juno and Lightolier), and we carry fixtures that are compatible with all three systems.
Do you need a transformer for track lighting?
Track systems are 120 volts, so they only require a power feed to connect the track line to your home’s wiring. These are usually low-voltage systems and require their own transformer.
Is track lighting hard to replace?
Track lighting consists of an electrified track that mounts to a ceiling or wall and individual fixtures that attach at any point along the track. Replacing the fixtures is a simple process, provided you can find a matching replacement fixture or a whole set of new fixtures that are compatible with your track system.
What are the components of track lighting?
There are at least three components necessary for creating a custom track lighting system: 1) Power Track – 2′, 4′, 8′, or custom length. Track with lengths exceeding 24′ should include more than a single power feed. 2) Power Feed – end, straight, “L”, “T”, “X” or conduit. 3) Track Fixtures.
What are the parts of a track light?
Track light systems have two main parts. One is the track, which is wired to power and holds the conductors for the heads. It looks, in cross-section, like a square “U,” or a square that has the center part of one side missing. This is the part that’s mounted to the ceiling or wall, with the opening facing down or out.
What is modern track lighting?
Modern track lighting has come a long way since the peak of its popularity in the 80s. The ultimate contemporary lighting option, track lighting is an easy way to illuminate spaces in modern homes and studios. These lights work well in spaces with both standard and vaulted ceilings and look good in rooms ranging from kitchens to bedrooms.
What is commercial track lighting?
Track lighting is characterized by fixtures that are attached anywhere on a track device which contains electrical conductors. Rather than the traditional wiring of each fixture, track lighting is flexible because all the electrical wiring is concealed inside the track. Tracks are most commonly mounted to ceilings, walls, or beams.