Why is the HDMI not working on my ps3?

Why is the HDMI not working on my ps3?

There could be an issue with your HDMI cable. Try another HDMI cable and make sure it is PS3 compatible (version 1.3 or higher). Some TVs have multiple HDMI channels so flick through them and make sure you’ve tried all channels.

What do you do if your TV says no signal?

Reset the box

1. Turn everything off at the wall.
2. Check that all cables are securely and firmly in place.
3. Wait for 60 seconds.
4. Plug your TV box (not the television set) in and turn it on.
5. Wait another 60 seconds, or until the lights on the TV box have stopped flashing.
6. Plug everything else back in and turn it all back on.

Why is my PlayStation not showing on TV?

Turn off your TV and unplug your HDMI cord. Plug the (“high speed!”) HDMI cable from your PS4 into the 4K 60hz port on your TV. Turn your PS4 off (hold the button) and repeat the previous setp to go back into Safe Mode. Now choose the “change resolution” option and your PS4 will restart.

How do you reset the input on a ps3?

Turn off the PS3. Press and hold the I/0 button until it beeps twice. This will reset the PS3 to default screen settings.

How do you fix a bad HDMI cable?

Top tips to fix a HDMI fault:

1. Check there isn’t a loose connection on either the Source or Display end of the HDMI cable.
2. Try disconnecting and reconnecting the HDMI cable at each end.
3. Check the obvious!
4. Try changing HDMI channel inputs on your display – there may be an issue with either the EDID or HDCP ‘handshake’.

Why is my PS3 not working?

One cause of the PlayStation 3 not booting is a faulty power supply. A much smaller percentage of PS3 consoles will display the yellow light as a result of a faulty power supply.

How do you hook up a PS3?

Plug the HDMI cable into the PS3’s HDMI out plug-in or connect your component cable’s output into the PS3’s “AV Multi Out” plug-in. Both outputs are positioned on the rear of the PS3. You can use any HDMI cable for the PS3, but you must use a PS3-specific component cable.

Why does my TV say no signal?

Turn your TV and receiver off and back on.

Make sure your TV is on and slowly go through the available inputs,pausing briefly at each until a DIRECTV picture…