Is a Silvertone a good banjo?
Yup, Silvertone instruments were decent for the money, as starters, but not something worth putting a lot of “Improvement Money” into. If nothing else, you can learn how to take a part and re-assemble a banjo.
Who made Silvertone banjos?
Silvertone is a brand created and promoted by Sears for its line of consumer electronics and musical instruments from 1916 to 1972. The rights to the Silvertone brand were purchased by South Korean corporation Samick Music in 2001.
What does the tailpiece do on a banjo?
The banjo tailpiece plays a very important role in the tone and volume of your banjo. Its prime function is to anchor your strings. Its secondary function is to angle your strings to exert maximum pressure on the bridge in order that the bridge transmits sound into the banjo head.
What is a no knot tailpiece?
A No Knot tailpiece is a type of banjo tailpiece designed around the turn of the 20th century. It was created to solve the problem of having to tie a knot with the gut strings that were being used at that time to attach the strings to the tailpiece. Thus, no knot tailpieces have a much mellower/plunkier tone.
Is Silvertone a good brand?
Silvertone’s are very common and generally just junk guitars made of plywood. There are some good ones out there but they are very expensive for the good stuff such as the Paul Stanley Apocalypse signature. My site for helping those with a low budget find good gear.
Is a Silvertone guitar a good guitar?
If the Silvertone lacks vintage authenticity, it’s capable of producing a very broad range of really nice sounds, and you could make it your main—or only—stage guitar just as readily as, say, a favorite Telecaster or Les Paul Jr. For just around five hundred bucks, that’s a pretty decent return on your investment.
What does a tailpiece do?
While the primary function of the tailpiece is to connect the strings to the end of your stringed instrument, tailpiece can have a significant effect on the sound and playability of your instrument.
How do you adjust the tailpiece on a banjo?
You can adjust the angle of the tailpiece with a screw found on the back of it. To get a crisp, bright tone, adjust the tailpiece down closer to the head. In contrast, loosening it farther away from the head will have the opposite effect.
How do you set up a new banjo?
A new banjo will have it’s bridge laying flat on the banjo’s skin. You need to bring it upright by doing the following: Loosen the strings by turning the tuning pegscounter-clockwise. Once the strings are loose enough, lift the bridge up so it can stand upright under the strings.
Where is the tension nut on a banjo?
It is located on the top side of the peghead under anm access cover. Turning the nut clockwise tightens the neck and decreases neck bow, while turning it counterclockwise loosens it and increases neck bow. Depending on whether you like a bright or a mellow tone, you will need to tap-tune the head and adjust the tension to between G or a B.
Do you need to tighten the head on a banjo?
Depending on whether you like a bright or a mellow tone, you will need to tap-tune the head and adjust the tension to between G or a B. New banjos tend to need to be tightened more often than old banjos. In fact, some older banjos will need their heads loosened every now and then.