How high should the drain be for a washing machine?
In order for the drain hose on your Top Load washer to function properly, the drain must be at least 30″ up from the floor and less than 8 feet high. In order for the drain hose on your Front Load washer to function properly, the drain must be at least 24″ up from the floor and less than 8 feet high.
What height is a washing machine drain and hook up set at?
between 30 and 55 inches
Washer drain hookups should be between 30 and 55 inches from the bottom of the washer. The same measurements apply if the washer drains into a laundry tub. While the faucet heights may vary, the water supply is generally installed directly behind the washer.
Does a washing machine drain hose need to be elevated?
Yes, the drain hose needs to be elevated and it’s always best to do so at a level that’s higher than the washing machine itself. This will prevent possible siphoning. There are also other steps you can take to ensure that you get the best drainage.
What is code for washing machine drain?
2 inches
According to the Universal Plumbing Code, the standard for washing machine drain size is 2 inches. The P-trap should be between 6 and 18 inches high from the floor, while the pipe should be between 18 and 30 inches high from the floor.
Can a washing machine drain into 1 1 2 pipe?
Drain and Trap Requirements A 2-inch drain pipe is required for all washing machines. The former requirement of 1 1/2-inch pipe is not enough to handle the fast drainage of modern washers. As with all plumbing fixtures and appliances, a washing machine drain pipe must also contain a P-trap.
How do you route a washing machine drain hose?
Reach around to the back of the washer with the measuring tape or yard stick. Leave the machine in its current position. Measure the maximum height of the discharge hose, at the arch, from the floor where it terminates into the standpipe in the floor, nearby laundry sink or recessed drain in the wall.
Do I need a P-trap for a washer drain?
When hooking up a new washing machine, some people look for a convenient drain line and simply install a pipe that extends to the washer. The lack of a P-trap exposes the area to sewer fumes and the lack of venting will cause the drain to run sluggishly and overflow. Washers, like all fixtures, need a trap.
Does a laundry drain need a trap?
Your washing machine needs a trap on the drain line because the drainpipe connects to the sewer or septic system. This means the pipe can be a conduit for sewer gas to drift up into your home. Every time your washer drains, some of the water that flows into the pipe is caught in the trap.
How do you stabilize a washing machine drain hose?
Loop the bent end of the hose over the lip of the sink, which should not be more than 45 inches away from the washing machine. Secure the hose to the leg of the laundry sink using a plastic cable strap. Make sure that the hose end is not touching the bottom of the sink, which could restrict the flow of water.
Does a washing machine need an air gap?
Without an air gap, a washing machine’s dirty water may back-flow. Having an air gap gives you peace of mind, knowing that your plumbing’s water pipes are protected from contaminants, but ultimately you may be required to have an air gap installed on your washing machine whether or not you want to.
What size drain do you need for a washing machine?
A 2-inch drain pipe is required for all washing machines. The former requirement of 1 1/2-inch pipe is not enough to handle the fast drainage of modern washers.
What is the maximum length for a washing machine drain hose?
The drain hose does have a limit. The recommended maximum length for the drain hose is 12 feet. If your drain line needs to be 18 feet there may be a problem.
What is the size of a washer drain?
The standard for new washing machine drain sizes, according to the Universal Plumbing Code, is now 2 inches. The pipe should be between 18 and 30 inches high from the floor, while the P-trap should be between 6 and 18 inches from the floor. These standpipes connect into the home sewage system.
What is the standard height for clothes washer drain?
Washers Drain Height . The washer drain hose is 1ΒΌ” O.D. (outside diameter). To be confident that no siphoning of water will take place, the drain plumbing should be a minimum of 30″ high. In order for the drain hose to function properly, the drain must be at least 30″ from the floor and less than 8 feet high.