How do I refill my Dunhill Rollagas lighter?

How do I refill my Dunhill Rollagas lighter?

Turn your lighter upside-down. Locate the fill valve at the bottom of the lighter and insert the filler tube of your can of Dunhill butane fuel into the valve hole. Press down on the can until a few drops of liquid fuel squirt out and then remove the can and turn the lighter right-side up.

How do you change Flint in Dunhill Rollagas?

Replacing a Dunhill Rollagas Flint

1. Dunhill lighters require either a Red or a Blue Dunhill flint.
2. Open the lid.
3. Push back the flint slide and the flint chamber will pop open.
4. Shake or tap the used flint out of the chamber.
5. Insert the new Dunhill flint in the flint chamber.

Are Dunhill lighters butane?

To avoid causing clogged burner valves and misfires in your valuable Alfred Dunhill lighter, only Dunhill-brand butane will do. Ultra-refined with typical Dunhill standards to ensure proper working condition of your lighters for the long-term.

How do I refill Dunhill unique?

Use a coin or fingernail to unscrew the cap to the filler valve. Rotate the cap counter-clockwise and remove it from the lighter. Press the nozzle of the fuel refill can as far as it will go into the valve aperture. You will hear a loud hiss indicating that the liquid fuel is entering the lighter.

How do you refill a refillable lighter?

Shake the butane gas refill can, press the stem of the refill can directly onto the refill valve on the bottom of the lighter. Keep them in a straight position and let the gas go into the lighter for about 5 seconds. Repeat for a shorter period if needed.

How old is my Dunhill lighter?

Look for a serial number on the bottom of your Rollagas lighter. If the number is there, the lighter was made in the 1970s or later. Older models have a serial number inside the lighter; a Dunhill technician must take apart the lighter to access the number.

How do I know if I have a Dunhill lighter?

How do you refill a lighter?

Fill the lighter for about five seconds. Press down on the lighter firmly for about five seconds to refill the lighter. After filling, if you feel like your lighter isn’t full, repeat this procedure for another five seconds. Refill cans low on fuel may take more time to refuel lighters.

What should I do if my Dunhill rollagas lighter is too low?

Close the cap if the flame is too low or too high. Turn the lighter upside-down and pull up the handle on the adjustment wheel with your fingernail. Turn the handle clockwise to increase the flame size or counterclockwise to decrease it before you open the cap and relight the lighter.

Do you need a Dunhill Flint for a rollagas?

All Rollagas lighter models, including the smaller Rollagas Jr. series, require butane and a Dunhill flint in order to generate a flame. You can also adjust the size of your Rollagas flame by using the adjustment dial that is located either on the back or on the side of your lighter, depending upon the model.

What kind of gas do you use to refill a Dunhill lighter?

Dunhill recommends only using Dunhill lighter fuel to refill Dunhill lighters. It is important to follow the correct steps when refilling the lighter to prevent fuel leaks or damage to the lighter. Dunhill lighters use butane gas to fuel the lighter flame.

How do you fill a Dunhill rollagas side adjuster?

Close the cap of your lighter and make sure you are far from any source of flame, sparks or extreme heat. Remove the protective cap of the filler valve from the base of your Rollagas Jr. or Rollagas side adjuster model by pressing gently downward and turning it slightly in a counter-clockwise direction.

https://www.youtube.com/watch?v=1K4L3mrRSuw