How do I fix Xerox fuser error?

How do I fix Xerox fuser error?

Power Off the Printer, Unplug the Power Cord, Wait One Minute, Plug the Power Cord Back in, and Then Power On the Printer. 2. Replace the Fuser Assembly*. If the problem persists, contact Support for additional assistance.

How do you clear the fuser error on a Xerox printer?

Reset Fuser

1. Press the [Machine Status] button on the Control Panel.
2. Select the [Supplies] tab on the Touch Screen.
3. Select the [Fuser] button.
4. Select the [Reset Counter] button and then the [Yes] button to reset the Fuser.
5. Select the [Close] button to return to the default (Copy) screen.

What does fuser error mean on a Xerox printer?

Refer to steps to replace the fuser as reference but do not replace the fuser Replace the Fuser. If the problem persists, contact Support for additional assistance.

What is a fuser in a Xerox printer?

A fuser unit is a pair of heated rollers within the printer that fuses the toner onto the paper being printed on. Toner particles are pulled to the paper to create the desired text and images as the paper passes the imaging drum.

What is open fuser error?

The open fuser circuit error is a pretty straight forward message. The AC current provided to the fusing assembly is either not getting there or the power gets to the fuser but doesn’t come back out so you have an open circuit issue.

What is the fuser assembly in a printer?

The fuser unit is a very important component of laser printers. The fuser unit, which is essentially two heated rollers, uses pressure and heat to fuse the toner powder onto the paper. Depending on your printer model, the fuser unit may be sold separately or it may be included in the printer’s maintenance kit.

What is the role of fuser in printer?

How do you fix a open fuser error?

Open Fuser Circuit Error, Xerox Phaser 4600 / 4620 Printer

1. Turn the machine off then back on or turn it off, let it sit 20 to 30 minutes, plug back in, and turn back on.
2. Remove the right side cover on the fusing assembly and check the connectors to make sure they all look ok.
3. Reseat the fuser and try again.

How do you bypass toner chip?

To bypass your toner or ink chip you can do any of four things.

1. Use an auto-reset ink tanks if your printer models have them.
2. Fit your printer with a new chip or ink tank.
3. Use your printer model’s chip resetter to restore the “empty” chip to full.
4. Disable your ink or toner monitor.

Why is my new toner not working?

If your toner cartridges aren’t installed correctly, it can prevent your printer from functioning properly. Diagnosis: A toner cartridge is ajar, stuck inside the printer, or otherwise improperly inserted. The most likely fix for this problem is to take the cartridge out. If it’s empty, replace it with a new cartridge.

How to replace the fuser assembly on a Xerox printer?

1 Power off the machine. 2 Open the Bypass Tray (Paper Tray 5), located on the left side of the printer, by rotating it outward. 3 Lift up on the release lever on the Top Left Cover A to open the cover. 4 Wait at least 40 minutes for the Fuser Assembly to cool.

Where is the bypass tray on a Xerox printer?

Open the Bypass Tray (Paper Tray 5), located on the left side of the printer, by rotating it outward. Lift up on the release lever on the Top Left Cover A to open the cover. Wait at least 40 minutes for the Fuser Assembly to cool.

What should I do if my printer fuser is not working?

1. Power Off the Printer, Unplug the Power Cord, Wait One Minute, Plug the Power Cord Back in, and Then Power On the Printer. 2. Replace the Fuser Assembly*. If the problem persists, contact Support for additional assistance.

What to do if a Xerox printer cartridge is defective?

IMPORTANT: P lace any suspected defective cartridge that is removed from the printer in protective wrapping/packaging material for situations where it may still be a functioning cartridge. If you do not have the original packaging material, use the packaging from the new cartridge. Power off the machine.