How do you manually light a montigo fireplace?

How do you manually light a montigo fireplace?

To light the pilot we recommend the use of a long match or removal of log“C”, “F”, “G”: a) Partially depress and turn dial on gas control valve to “OFF” position and wait 5 minutes. b) Turn dial to pilot position, depress dial and light pilot burner, hold for 1 minute, then release.

How do you tell if fireplace gas valve is on or off?

Each gas appliance should have a gas line running to it that will have a valve located just before the appliance. This valve will likely resemble the valves on your gas main and can be operated by turning the valve to sit either in line with the pipe when the gas is on, or perpendicular to the pipe when the gas is off.

How do I turn on my gas fireplace valve?

Igniting with a Fireplace Key

1. Look over the user manual included with your fireplace.
2. Remove your fireplace’s outer cover.
3. Put a fireplace key into the device’s gas valve knob.
4. Hold a long lighter up to the burner and ignite it.
5. Turn the gas key.
6. Replace the fireplace’s outer cover immediately.

How does a gas fireplace control valve work?

Gas flows into a series of valves attached to your gas fireplace. The valves are always closed unless something opens it. This prevents gas from flowing into your home when the fireplace is not lit. A device called a thermocouple will hold open the pilot light valve as long as the pilot light is lit.

How do you clean the glass on a montigo fireplace?

Clean the glass using a soft cloth and an approved, non-abrasive cleaner such as Kel-Kem or White Off.

How do you know if a valve is open or closed?

Ball valves are perhaps the easiest valve to see if they are open or closed. If the handle on top is parallel to the valve, it’s open. Likewise, if the handle is perpendicular to the top, the valve is closed.

Why is my gas fireplace not turning on?

Check your breaker box and reset any tripped breakers you come across. Gas Valves: Make sure that your gas valve is open and in the on position to ensure the flow of gas to your fireplace. If turning the knob to the on position doesn’t open the gas flow, contact your propane supplier. The tank may be exhausted.

What causes white film on gas fireplace glass?

The main reason the glass develops a white powdery film is due to moisture in the gas (both natural gas and propane gas) it burns not being completely dried before turning off your fireplace. The other cause of dirty glass is`1 black soot. The soot will continue to build and can cause a dangerous situation.

Where can I find a Montigo product manual?

Welcome to the Montigo download center where you can easily access relevant documentation and manuals for our products. If the information you need isn’t listed here, please check the discontinued product manuals and guides click here. Please note that we may not have a manual available for all products and accessories.

Are there any warranties on a Montigo fireplace?

The Montigo warranty will be voided by, and Montigo disclaims any responsibility for, the following actions: • Modification of the fireplace and/or components including Direct- Vent assembly or glass doors. • Use of any component part not manufactured or approved by Montigo in combination with this Montigo fireplace system.

What do you need to know about Montigo?

Montigo partners with architects, designers and builders to bring vision to life. From private luxury homes, to hotels, casinos, restaurants, and other public spaces, a fire feature is the heart of every warm and inviting space.

What should be included in a fireplace installation manual?

Pay special attention to all cautions, warnings, and notices throughout this manual intended to ensure your safety. This manual covers installation, operation and maintenance. Lighting, operation and care of this fireplace can be easily performed by the homeowner.