How do you program Astro timer?

How do you program Astro timer?

1. To begin programing press the large button and hold for 3 seconds.
2. The timer displays 24-hour format or 12-hour format.
3. Using small button select the display mode.
4. You will need to enter your latitude and longitude coordinates during set up.
5. The timer can hold up to 7 on/off programs.

How do I program my GE digital timer model 15079?

How to Program a GE 15079 Timer

1. Press the reset button located under the “Hour” button to clear any previously entered programs.
2. Press and hold the “Clock” button.
3. Press the “Day” button until the correct day is displayed.
4. Press the “Hour” button until the correct hour is displayed.

How do you program a woods digital timer?

How to Program a Woods Outdoor Digital Timer

1. Step 1: Access the On/Off Setting. Press the PROG button once.
2. Step 2: Set the Desired Time. Press the minute and hour buttons as necessary, to the desired time.
3. Step 3: Change the Day Setting.
4. Step 4: Repeat.
5. Step 5: Exit This Mode.

Why does my plug timer not work?

If the timer doesn’t activate the connected light, it might be working but the light bulb in the fixture might be burned out. Get on a sturdy ladder and twist the bulb fully into the socket. If the light still fails to turn on, the light bulb might be burned out. Replace the bulb with a new one.

What do you need to know about the GE 15079 timer?

GE 15079 timers provide an easy and convenient way to automate small electrical appliances such as lights or coffee pots. The 15079 timer plugs into a standard wall outlet and has outlets for two devices. Any device plugged into the GE 15079 timer can be set to turn on or off at preset times on specific days.

How do I Reset my Digital heavy duty timer?

Press the reset button. The reset button is the small round white recessed button on the right side of the timer face. Set the clock. HOUR: Press the clock button and simultaneously press the HOUR button until you arrive at the correct hour. Program your settings. Set to automatic.

How do I set the timer on my Hunker?

Press the “Set” button until the CTD icon appears on the display to enter the countdown programming menu. Press the “Hour” and “Minute” buttons to set the amount of time that will elapse before the device plugged into the timer turns off. Press the “Clock” button to store the countdown setting and exit programming.