What is the difference between PC3-12800 and PC3L 12800?

What is the difference between PC3-12800 and PC3L 12800?

6 Answers. PC3 is standard voltage (1.50V) where PC3L is low voltage (1.35V) – A system which requires PC3L cannot support PC3 RAM. PC3L RAM will work in a PC3 based system as it will run at the standard voltage and will inter-operate with PC3 RAM within the system.

What is the frequency of PC3-12800?

PC3-12800 has a data rate of 12800 MB/s and runs internally at 1600MHz (clock speed 800MHz), so can also be called DDR3-1600.

What PC3-12800 800Mhz?

PC3-12800 = DDR3-1600. DDR means “Double Data Rate”. So DDR3-1600 means it is 800Mhz with a double rate (effectively 1600Mhz). In short, 800Mhz is the right number.

Is DDR3/1600 the same as PC3-12800?

PC3-12800 (12800 MB/sec) is the same thing as DDR3 1600MHz (1600 MHz data transfer rate) and it runs at 800 MHz DDR clock. Similarly for others, just divide/multiply by 8. Any memory that has the correct voltage and capacity and is same or faster than what is supported by the board should work in the board.

Can I use PC3-12800 and PC3 10600 together?

PC3-12800 works just fine as PC3-10600 speeds. Think of it as a car capable of going up to 120kmph on a 100kmph highway. It will work just fine. Regular DDR3 DIMMs are designed to work at 1.5 volt.

Can I mix PC3-10600 with PC3-12800?

What is DDR3 PC3-12800?

Kingston Memory he next generation of DDR3 has arrived. DDR3-1600 memory has a module classification of PC3-12800, which effectively means the peak data rate of the module is 12.8GB/sec (see table). That’s about a 17% improvement on memory bandwidth over DDR3-1333.

Can I use PC3-10600 instead of PC3-12800?

Yes most computers that use 10600 can support 12800.

What does 12800s mean?

New chipsets and processors from AMD® and Intel® now support memory operating at 1600MT/s (aka 1600MHz). DDR3-1600 memory has a module classification of PC3-12800, which effectively means the peak data rate of the module is 12.8GB/sec (see table). That’s about a 17% improvement on memory bandwidth over DDR3-1333.

What is the difference between PC3-10600 and PC3-12800?

The 12800 refers to a data rate of 1600MT/s while the 10600 is 1333MT/s so the faster 4GB module will be underclocked to run at the slower 1333 rate for uniformity which should not cause any issues, as long as the timings also match, especially with performance since 1333MT/s DDR3 is plenty fast for average everyday …