How do you reset the code on a John Deere backhoe?
Write down any codes that appear in the system for your records. Press “SELECT” to scroll through the codes until “END” appears on the display. Press “SELECT” again, “WAIT” will be displayed on the screen. Hold “SELECT” for 5 seconds to clear all John Deere diagnostic codes from the system.
How much does a new John Deere backhoe cost?
Machines with a 14-foot dig depth – the industry standard – and horsepower between 70 and 90 cost anywhere from $50,000 to $90,000. Slightly larger models with dig depths of 15 to 16 feet run $75,000 to $110,000. Backhoe loaders with dig depths greater than 16 feet usually cost $110,000 to $150,000.
How much does a John Deere 310se weight?
13500 lbs
Operating Specifications
| Alternator Supplied Amperage | 65 A |
|---|---|
| Operating Weight 2wd | 13500 lbs (6,124 kg) |
| Operating Weight 4wd | 13500 lbs (6,124 kg) |
| Rear Axle Fluid Capacity | 3.5 gal (13 l) |
| Tire Size Front – 2wd / 4wd | 11L-15,8PRF3;11L-16,12PR F3;12.5/80-18,10PR |
What is engine derate John Deere?
Engine derating is the reduction of an engine’s output due to less-than-ideal operating conditions. However, in some applications, such as a power generation facility, unwanted derating reduces the energy production which leads to lost revenue potential.
What year is a John Deere 310 a backhoe?
John Deere is celebrating 50 years of backhoe loaders, a history of innovation and excellence that started with the introduction of the JD310 model in 1971.
How do I read my John Deere 5100e code?
Press and hold the roll mode switch for 5 seconds to begin diagnostic session. Upon entering diagnostics, any active or previously active codes automatically appear in a scrolling fashion with each one showing the control unit (3 letter abbreviation) and the code number (XXXXXX.