Is epoxy oil based or water based?
Epoxy floor coatings are usually two part solids based, solvent based or water based. Epoxy flooring consists of a Resin part and a Hardener part, much like epoxy glue. Regular garage floor paints are one part oil based or water based.
What is the difference between water based and solvent based epoxy?
Solvent-based Epoxy Coatings Unlike water-based solutions, adding solvent to the epoxy only reduces its strength slightly, and it’s also more resistant to petroleum contamination in the concrete. Therefore, it’s viewed as the best all-around solution for easy-to-install epoxy coatings, particularly in machine shops.
What is water based epoxy used for?
Water Based Epoxy Water-based epoxy coatings typically have a very low to zero solvent content and minimal odor, and depending on the product, can often be applied to concrete while it is still damp or still in the process of curing.
Can you put water based epoxy over oil based epoxy?
No. Water based paints are best and fast drying. The epoxy can go over them in about 24 hours.
Does water based epoxy yellow?
However, some epoxy resins will turn yellow when exposed to ultra-violet light and become brittle over time. Therefore, it is important that a clear coat with a high-quality UV absorber package is used to protect the resin from aging.
What is the difference between 1 part and 2 part epoxy?
1-part epoxy paint is a latex acrylic product that has a little bit of epoxy mixed in to make it strong enough to hold up to light traffic on your garage floors. 2-part epoxy is the heavy-duty resin that coats the garage floor and cures over time.
Will epoxy set in cold weather?
In cold weather (below 50 degrees) you will notice the curing of ART’s Epoxy System begin to slow. The colder it gets the slower it takes to fully harden. A thin repair completed at 35 degrees may take as long as a week to fully cure.
Can epoxy go over oil-based paint?
The epoxy can go over them in about 24 hours. OIL BASED paints take a LONG time to fully dry. If an oil-based paint is used, you must apply 3 coats of oil-based polyurethane to seal the surface before applying a seal coat of our UltraClear epoxy.
What’s the difference between solvent based and solids based epoxy?
Here are the major differences between solvent based vs solids based vs water based epoxy! A solids-based epoxy is the most basic kind: simply the resin with some hardener, without any water or solvents added. Solids-based epoxy creates the thickest floor coating, as well as usually being the strongest option.
Which is better epoxy or oil based flooring?
An epoxy floor coating is usually a two part coating that you mix together rather than a single component. An epoxy floor coating will adhere to your garage floor or any concrete floor for that matter way better than any conventional oil based, water or enamel paint, think epoxy glue type adhesion vs duct tape adhesion.
When to use 100% solids epoxy floor coating?
It is therefore most often used in light to moderate duty environments, where more frequent recoating is acceptable. 100 Percent solids epoxy floor coatings contain no VOCs or water. While they can vary in viscosity, all 100% Solids epoxies produce a thicker dry film when compared to solvent or water based products.
Which is the best coating for water based epoxy?
The washability, chemical resistance and hard, impact-resistant finish of Pro Industrial™ Pre-Catalyzed Waterbased Epoxy makes it the ideal coating for high traffic areas like hospitals, schools and restaurants. Its excellent hide and great coverage minimizes the number of coats needed.