What is 49 service error on HP printer?
A 49 error typically occurs when the printer attempts to perform an action that the firmware is not capable of performing or might not be designed to handle, for example: Printing files that include unsupported printer commands.
Why does my HP printer Say error?
An issue most commonly associated with driver or printer cable problems, turning the printer off and on should see this error message disappear. A hardware problem may be the reason the error message persists. Try resetting the printer initially and reinstall the toner cartridge if the problem persists.
How do I reset my HP MFP printer?
To restore the product to the factory-default settings, follow these steps.
- Turn the product off. Disconnect the power cable from the product for 30 seconds and then reconnect.
- Turn the product on while you press and hold the Resume button for 10-20 seconds. The Attention light turns on.
- Release the Resume button.
What does 49 mean on a HP printer?
Intermittent 49 errors – Occur only part of the time with the printer alternating between functioning correctly for a period of time and then not functioning again. These errors are typically cleared by turning the printer off, and then on. Persistent 49 errors – Occur repeatedly after one or more attempts to solve the issue.
What does intermittent 49 mean on a printer?
Intermittent 49 errors – Occur only part of the time with the printer alternating between functioning correctly for a period of time and then not functioning again. These errors are typically cleared by turning the printer off, and then on.
What to do if you get a 49 error?
Updating the firmware solves most 49 errors. If 49 errors continue to occur intermittently, contact HP Support. If the 49 error will not clear from the control panel, perform these steps in the order presented. If at any time the step clears the error, you do not need to continue troubleshooting.
How do I Turn Off my HP printer?
On the control panel, open the Preboot menu. Turn the printer Off and then On, and when the HP logo displays on the control panel and all three Ready, Data, and Attention LEDs illuminate solid, press . Turn the printer Off and then On, and when 1/8 displays below the HP logo on the control panel, touch the logo.