What happens when the timer goes out on a washing machine?

What happens when the timer goes out on a washing machine?

A washer can also fill with water and start agitating. However, a faulty timer will cause the washer to continue on in the agitation cycle. The washer can become stuck at any time during the washing process, even during the rapid spin cycle that dries the clothes partially.

How do you know if your washer timer is bad?

Signs that you may have a faulty timer switch are missing cycles, stalling in the middle of cycles or the timer simply not advancing through the cycles. You will need to refer to the cycle sequence chart for your model to determine which contacts to troubleshoot.

How to replace the timer knob on a general electric washer?

To complete this repair you will need a pair of needle nose pliers. Turn off power to the washer before you start. Pull off the timer knob and use your pliers to remove the retaining clip. The new knob will already have a clip in place. Line up the knob opening with the shaft and slide it on.

Why is the timer on my ge washing machine not working?

The timer knob clip on your washing machine connects the timer knob to the control panel. If your timer knob is damaged or will not stay in place, you may need to replace the clip. If the timer does not advance or the washing machine will not start, this may also be a symptom of a damaged timer knob clip.

What is the color of the GE timer knob?

Color: White. For bisque order WH01X10311. This knob includes the push on clip that attaches the knob to the switch. Removal can be done by pushing the clip under the knob with a very small flat head screw driver. GE Factory Part. GE brands include General Electric, Hotpoint, RCA, and others.

Why do I need to replace the timer on my Hotpoint washer?

This timer knob or control knob assembly is designed for a washing machine, and comes with a retaining clip. It attaches to your timer dial and allows you to turn the timer. The main reason you would need to replace the timer knob, is if the teeth on the inside of it are worn, and will not allow you to adjust the timer.