What type of oil do you put in a 2014 Jeep Wrangler?

What type of oil do you put in a 2014 Jeep Wrangler?

The 2014 Jeep Wrangler 3.6L Engine requires MOPAR SAE 5W-20 engine oil or equivalent Pennzoil or Shell Helix are recommended for all operating temperatures. The 2014 Jeep Wrangler 3.6 Liter Engine oil capacity is 6 Quarts (5.6 Liters).

How much oil does a 2014 Jeep Wrangler take?

6 quarts
Capacity: 6 quarts. (with filter)After refill check oil level.

What kind of oil does a 2014 Jeep Cherokee take?

The 2014 Jeep Cherokee uses SAE 5W-20 motor oil in the engine. Jeep recommends that You use synthetic oil whenever You need to replace it.

How often does a 2014 Jeep Wrangler need an oil change?

Synthetic oil usually should be changed every 7,500 – 10,000 miles. Jeep recommends getting your 2014 Jeep Wrangler oil & filter changed every 3,000-5,000 miles for conventional oil.

Does my jeep need synthetic oil?

How often does a 2018 Jeep Wrangler need an Oil Change? Synthetic oil usually should be changed every 7,500 – 10,000 miles. An oil change is one of the most prime and key services for your car. Jeep recommends getting your 2018 Jeep Wrangler oil & filter changed every 3,000-5,000 miles for conventional oil.

Can you use 5W 30 instead of 5W-20?

Can You Use 5W-30 Instead of 5W-20? In theory, yes, you can switch from using 5W-20 to the 5W-30 because they have similar viscosity ratings. In fact, often, when you take your car to a mechanic for an oil change, they’ll put the 30 instead of the 20 because it’s thicker.

Can I use 0W-20 oil instead of 5w20?

The 0W or 5W refers to the pumpability in cold temperatures. Therefore, a 0W would flow more easily than a 5W and could be an acceptable substitute. Thus, it is suitable to use a SAE 0W-20 as a replacement for SAE 5W-20 application.

How often should you change your oil in a Jeep?

Change that Oil! The Wrangler’s Owner’s Manual recommends changing the oil and filter when the Oil Change Indicator System alerts you to do so, but recommends intervals not exceed 12 months or 10,000 miles, whichever comes first.

How do you reset the oil life on a 2014 Jeep Wrangler?

How To Reset Jeep Wrangler Oil Light after Oil Change

1. Turn the key to ON/RUN position with engine off.
2. Fully depress and release the accelerator pedal 3 times within 10 seconds.
3. Turn the key to the OFF position and then back on to confirm reset was accepted.

What brand of oil does Jeep recommend?

Pennzoil® is the only motor oil recommended by the Jeep® brand in North America.