What is RGB LED module?

What is RGB LED module?

The RGB LED module is constituted of a plug-in full-color LED. The intensity of the three primary colors, namely, red, green, and blue, can be adjusted by PWM voltage input at pins R, G and B, thus producing a variety of mixed colors.

Can you connect RGB LED strips together?

You can connect both single color and RGB LED tape lights with each other.

How do I connect RGB module to Arduino?

Connect the cathode of the RGB led which is the longer pin of RGB led to the GND of Arduino and the other three pins to the pin 11, 10, 9 of Arduino through the 220 ohm resistors. The resistors will prevent the excess amount of current to flow through the RGB led.

Where should I put my LED lights in my room?

To level up your light design, try installing LED strips in these five places around your home.

1. Under cabinets. As the name implies, under-cabinet lighting illuminates areas underneath your cabinetry.
2. Along toe kicks.
3. Under shelves.
4. Under the bed.
5. Behind computer and TV screens.

Are LED lights bad for your eyes?

The short answer to this is no, they won’t hurt your eyes. This concern comes from the LED bulb’s use of blue light. It can only become a problem for people who have existing eye conditions. LEDs use the same amount of blue light that our smartphones, computers, and tablets use.

How do I connect my LED lights to my controller?

Connect the LED controller to the LED strip light, so if you notice, there is a little tiny arrow on this controller. Those two arrows need to meet with each other. If you have it flipped around, the arrow is going to be at the bottom. Plug your power source into the wall and then plug your light into the control box.