What is air AP3802I e K9?

What is air AP3802I e K9?

AIR-AP3802I-E-K9 is one of the Cisco 3800 Series Access Points. The Cisco Aironet 3800 Wi-Fi access points are designed for large enterprise organizations that rely on Wi-Fi to engage with customers. AIR-AP3802I-E-K9 is designed for Indoor, challenging environments, with internal antennas.

Can I use a Cisco access point at home?

Cisco access point desktop model for home users have AC/DC powering option. All other models have PoE powering options. An additional power injector will be required in case they are used at home.

What is better access point or extender?

An access point has the power to increase the network coverage in its designated area by 100%. A range extender is less effective, offering only about a 50% network coverage increase. Range extenders are a more cost-efficient option for individuals.

How do I setup a wireless access point?

Work

1. Introduction.
2. 1Connect the Ethernet port of your cable modem or router to your wireless access point’s Internet (or WAN) port using an Ethernet network cable.
3. 2Connect your wireless access point to your computer using an Ethernet network cable.
4. 3Turn on your DSL or cable modem and wait about two minutes.

How do I setup a router as an access point?

Simply connect the access point to one of the ports of your existing wired/wireless router then configure the access point’s wireless settings.

1. Open the access point’s web-based setup page by entering the default IP Address “192.168.
2. On the web-based setup page, click on Wireless.
3. Enter the Network Name (SSID).

What is the default username and password for Cisco AP?

In this case the username has been configured to ap-admin so anyone connecting a console to or using SSH or Telnet to connect to the AP will have to enter ap-admin as the username and the configured password.

How do I reset my wireless access point?

Unplug the access point’s power cable and wait for 30 seconds then plug it back in. Wait for the access point’s lights to appear solid. NOTE: Make sure to press and hold the Reset button properly. The lights on the access point should be blinking while you are holding the Reset button.

How many access points do I need in my house?

If you are looking for a benchmark to make a rough estimate however, you may approximate one access point per every 1000 square feet. Knowing the area in square feet or meters is a good start. As mentioned above, a very rough estimate is approximately one access point for every 1000 square feet.

How many access points can I connect to a router?

Many individual wireless routers and other access points can support up to approximately 250 connected devices. From a wired perspective, routers can accommodate a small number (usually between one and four) of wired Ethernet clients with the rest connected over wireless.