Can I connect fans with molex?
the molex connectors are to connect the fans directly to the PSU. The female part of the Fan-Molex-Connector to the male connector of the PSU. The male part of the fan is just so you don’t lose a connector by using the fan and can connect to any other molex female connector in your setup to supply power.
What is a KK connector?
KK connector systems are customizable for a variety of power and signal applications. Available in industry-standard 2.54, 3.96 and 5.08mm pitch sizes, this single-row, wire-to-board and board-to-board product family is cost effective and versatile.
What type of connector do PC fans use?
MOLEX
Power connections Most cooling fans will connect to a PC with a standard connector of some sort. Modern systems will typically use 3-pin or 4-pin dedicated fan headers, though standard MOLEX 4-pin peripheral connectors are also used. From left to right: A 3-pin connector, a 4-pin connector and a MOLEX connector.
Do molex fans run at full speed?
Yes, on molex they will run at 12volts witch is the maximum of a normal desktop fan (producing the maximum speed).
Should I use 3 pin or molex?
Just the 3 pin is fine , use molex if you don’t have any headers left on the board.
What is Molex power connector?
Molex connector is the vernacular term for a two-piece pin and socket interconnection. Pioneered by Molex Connector Company, the two-piece design became an early electronic standard. Because the pins have a large contact surface area and fit tightly, these connectors are typically used for power.
What is a JST XH connector?
The JST XH series’ disconnectable, 2.5 mm (0.984”) pitch, crimp-style connector was developed based on the high reliability and versatility of their NH series connectors. These wire-to-board connectors are typically used to bring power to a PC board. XH series connectors are available with one to twenty positions.
Where do I plug in PC fans?
CPU cooling fans should ALWAYS be plugged into the header that is specifically labeled “CPU Fan” and not “CPU Optional” or any other header.
Can I connect a 3 pin CPU fan to a 4 pin?
Please Note: You can connect a 3 Pin Fan to a 3 Pin or 4 Pin header on the motherboard. The fan will function normally no matter type of fan header is used. The fan connector will have two guides (1) and these will need to line up with the tab (2) that is on the motherboard fan header.
Can you control PC fan speed with molex?
If the fans will run suitably at 5v, one option is to simply rewire the fan’s molex connector to connect to the 5v line instead of the 12v one. This will typically make a case fan nearly silent, though it will be running notably slower, and in turn moving less air.