What is a hub drain?
Hub drain means a drain opening for indirect liquid wastes, (a) that does not serve as a. , (b) that has the same pipe size, material and venting requirements as a floor drain, (c) that has a.
What is a funnel drain?
The funnel prevents splashing and directs the waste into the drain. The exposed portion of grate serves as drain for any other waste on the floor. The funnel is attached to the grate by means of concealed screws and it may be moved to any grate location desired.
What is an area drain?
Area Drains are designed to collect excess rain and storm water runoff from roofs, sidewalks, parking lots, and paved streets.
What is Open Site drain?
Open site or drip drains are primarily for condensate producing equipment and other mechanical equipment where a direct connection is not desired or permitted. The funnels are available in a round design for a single pipe waste and in oblong sizes for multi-pipe waste lines.
Does a hub drain need a vent?
Hub drains are required to be vented. If floor drains can be used for equipment drainage and not require venting then the superior hub drain will unlikely be used.
What is a hub fitting?
Hub – a type of DWV fitting end that allows pipe to slide into the end. This standard allows NPT threaded fittings to fit together in a water-tight seal.
What is a funnel floor drain used for?
The funnel drains receive the condensate, drip or wastewater directly from indirect waste lines. The funnel prevents any type of splash and directs the waste into the drain. The exposes grate portion works as drainage for any type of floor waste.
How many different types of drains are there?
There are two basic types of drainage systems – French drains and area drain – each is effective, but for different problems.
How many types of drains are there?
There are two types of artificial drainage: surface drainage and subsurface drainage.
What is indirect drain?
Indirect Waste / Indirect Drain An indirect waste is a drainage piping that runs from a plumbing fixture or appliance and discharges into a separate waste pipe or receptacle. The space between the overflow rim of the fixture and the end of the indirect discharge piping is called the air gap.
What is a direct drain?
Direct drain allows the p-trap to be attached directly below the tub outlet. A standard tub drain has the outlet below the overflow pipe. With a direct drain tub, the drain pipe connects to the p-trap directly below the drain at the bottom of the tub.
What kind of hub drains are stainless steel?
StainlessDrains.com stainless steel hub drains are constructed of 304 stainless steel and are corrosion-resistant. Concentric & eccentric hub drains can be used with/or without strainer baskets and typically have other drain lines run to them. Below chart shows all hub drains in stainless steel 304 and schedule 10.
What do you need to know about food safe drains?
These drains are safe, come with tamper-proof grating, and feature a radius-free design, able to accommodate the heaviest flow rate. Your food-safe facility needs a tamper-proof drainage solution with radiused edges and a no-niche design to prevent bacterial growth.
What kind of drain is best for solids?
A heavy duty drainage solution built industry-tough to drain solids quickly and easily. These drains are safe, come with tamper-proof grating, and feature a radius-free design, able to accommodate the heaviest flow rate.