What is a 406 Ford engine?
The 406 engine used a new 4.13-inch bore with the 390’s 3.785-inch stroke, giving a displacement of 405.7 cubic inch, rounded up to “406” for the official designation. The larger bore required a new block casting design allowing for thicker walls, but otherwise was very similar to the 390 block.
What years did Ford make the 406?
Meanwhile, Ford wins in both NHRA Super Stock and NASCAR quickly began to evaporate. Ford’s solution, then, was to take the original 352 (the basis of the 390) a step further, resulting in the 406, making it available in time for the 1962 model year.
What years did Ford use the 406 engine?
Ford’s solution, then, was to take the original 352 (the basis of the 390) a step further, resulting in the 406, making it available in time for the 1962 model year.
What year did Ford make a 406 engine?
The 1962 Ford Galaxie 406 brought newfound power to the company’s muscle cars. Ford began 1962 without an engine over 400 cid, a serious deficiency against 409 Chevys, 413 Mopars, and 421 Pontiacs. The remedy came partway into the season with an enlargement of the 390-cid Ford to 406 cubic inches.
When did Ford introduce the 406 engine?
How many HP does a Ford 406 have?
The 406 was a one year option from 62 1/2 till 63 1/2. There were 2 versions first a single 4bbl 385 HP and then the 3×2 405 HP version. They are pretty rare but can still be found.
When did Ford stop making the Ford 406?
Because the cubic inch wars had already begun, Ford decided to end production of the 406 (which was actually only 405.1 cubic inches) in the last part of 1963 and replace it with the Ford 427 which would produce 20 more horsepower than the top end 406.
What are the production numbers for Ford 406 blocks?
There were a handful of crossbolted 406 blocks that were used in NASCAR produced by Ford. 406 blocks carry a C2 or C3 casting number. As some block casting numbers are generic the 406 production block numbers can prove a positive ID as they were paticular to the 406. Some 406 blocks were cast with 427 cyl wall cores and some std 406 wall cores.
What was the horsepower of a 1962 Galaxie 406?
Breathing through a single Holley four-barrel, the 406 had 385 bhp at 5800 rpm and 440 lb-ft of torque at 3800. As the Super High-Performance Tri-Power, it put three Holley two-barrels under a lovely oval air cleaner and was rated at 405 bhp.