What does the tap symbol mean on my dishwasher?

What does the tap symbol mean on my dishwasher?

The Tap symbol indicates: The water supply filters or aqua-stop hose are blocked. The dishwasher waterflow is too slow. The tap might be jammed or calcified causing low water pressure, or there is a kink in the supply hose / water hose.

How do I fix the water tap on my Bosch dishwasher?

Step-by-step guide: How to clean the inlet filter

1. Turn off the water tap.
2. Remove the hose from the water tap.
3. Clear the filter under running water. Use a small brush to clean.
4. Connect the hose and checks for leaks.
5. The supply hose may be kinked.
6. Pull the appliance out slightly and untwist any visible kinks.

How do you reset the check water on a Bosch dishwasher?

To reset the modern Bosch dishwasher, press and hold the start button for about 3 to 5 seconds. On some older Bosch models, the reset feature may be called “cancel” or “drain”. These older models require a specific Button Press Sequence or what we in the biz call a Key Dance to complete.

What does the tap symbol mean on a Bosch dishwasher?

Tap indicator lights up According to the instructions for Bosch dishwashers, if the indicator just lights up, it means that: The water tap is closed. The filter in the supply hose is clogged. Filters are clogged or blocked. The drain hose is clogged or bent.

Why is my Bosch dishwasher not draining?

The most common reason for a dishwasher to stop draining is because it has food debris clogged in the filter or the water pump. This is why it is important to provide regular maintenance to your dishwasher and clean it properly.

Where is the water tap on a dishwasher?

The water valve to the dishwasher is usually located under the sink. There may be several valves under the sink, but the dishwasher valve should be on a pipe or hose going through the cabinet into the dishwasher. To make sure the valve is open: Turn the handle counter-clockwise (to the left).

Why does my Bosch dishwasher not fill with water?

Check the water supply feed line underneath the sink. If it was turned off for any reason and mistakenly left off, the dishwasher cannot fill with water, even though the unit comes on. Look for a kink in the water supply line. If you find one, shut off the water valve, and remove the hose and kinks.

What does a blinking red light mean on a Bosch dishwasher?

The flashing red light on a Bosch dishwasher indicates that the door is not latched correctly, which is required to initiate the wash cycle. The door latch may not be fully engaged, or the latch sensor may be faulty.

Why is there standing water in the bottom of my dishwasher?

Water in the bottom of the dishwasher results from clogs in the filter, garbage disposal, drain hose, drain pump, or air gap. When food or sediment build up within these systems, the dishwasher won’t drain properly. Locating the blockage and clearing the debris will solve the problem.

What to do when Bosch dishwasher shows water tap error?

Bosch dishwasher shows water tap error. What to do when Bosch dishwasher shows water tap error? An indicator in the form of a tap is correctly called the “Check the water supply” indicator. Most owners prefer to use the dishwasher without “hammering their heads” with information about indicators, errors and other subtleties.

Why does my Bosch dishwasher have a light on the faucet?

If the “Faucet” indicator lights up, it is likely that there are problems with either the flow-through inlet filter or the intake valve. If this model of Bosch dishwasher has a display, the machine may also display error E01. What needs to be done? Turn off the tee tap to prevent water from entering the machine.

What does the tap icon mean on a Bosch dishwasher?

Tap icon is one of these indicators. Let’s clear out that depending on an error and a model of the Bosch dishwasher, the tap indicator may light up or blink. If there is a digital indication, the tap icon may blink and the display will indicate a fault.

What should the flow rate be on a Bosch dishwasher?

Flow rate must be min.10 L/min. when the water supply is open. The filter in the water supply blocked. Switch off the appliance and pull out the mains plug.