Can you replace fluorescent T8 with LED?

Can you replace fluorescent T8 with LED?

Yes, you can replace fluorescent tubes with LED tubes or LED integrated fixtures. As long as the bulb is compatible with the existing fluorescent ballast in the fixture, you simply remove the fluorescent and replace it with the LED tube light.

How much does it cost to change fluorescent lights to LED?

Upgrading Incandescent/CFL Replacements to LED Costs. Replacing incandescent and compact fluorescent lamp (CFL) bulbs with LED bulbs will cost about $6 – $9 for a 10-Watt LED. Therefore, if you change 24 bulbs, it will cost $144 – $216 to replace those all at once.

What does T8 stand for?

What does “T8” mean? The “T” designation in fluorescent lamp nomenclature stands for tubular — the shape of the lamp. The number immediately follow- ing the T gives the diameter of the lamp in eighths of an inch.

Can T5 replace T8?

T5 lamps cannot replace T12 or T8 lamps because of differences in physical and electrical characteristics. T5 lamps come in different lengths than T8 and T12 lamps. A nominal 4-foot T5 lamp is actually shorter than an equivalent T8 lamp [1149 millimeters (45.23 inches) in total].

Can I put T12 bulbs in a T8 fixture?

As far as safety is concerned, you can exchange them. If you place T12 tubes in a fixture with a T8 ballast, you will wear out the ballast and have to replace it. If you place T8 tubes in a fixture with a T12 ballast, then the tubes will have a shorter life due to a higher current through the tube.

Will T8 fit T12?

The main difference between T8 and T12 tubes is the tube’s diameter. T12 tubes are 1.5″ in diameter while T8s are just one inch. All other things—socket sizes, lengths, distance between pins—are the same. T8 LED tubes won’t fall out if you try to install them in a T12 fixture—they’ll fit just fine.

What is the bulb life of a T-8 fluorescent?

T8 bulbs are available as either linear fluorescent or LED tubes. T8 fluorescent tubes are commonly rated for 20,000 life hours , but range from 7,500 hours to 46,000 hours for standard T8 tubes. More energy efficient fluorescent T8 lamps can have a rated lifespan of up to 84,000 hours .

How much power does a T8 light fixture use?

On the other hand, a T8 light bulb can produce about the same level of brightness while only consuming about 25 watts per hour. This is a reduction of just under 40 percent in the amount of power required to operate the light. For screw-in light bulbs, the difference is even greater. A 40-watt incandescent light bulb produces about 450 to 500 lumens of light in most cases; while a screw-in T8 bulb can produce the same level of light and use only eight to 10 watts.

What are the power requirements for T8 fluorescent lamps?

What are the power requirements for T8 fluorescent lamps? It may be expected that the electric power needed to operate a 32-watt T8 fluorescent lamp will be 32 watts; however, this designation is simply the nominal power of the lamp.

What is the lifetime for T8 LED tubes?

Lifespan – The average life of a T8 LED is 50,000 hours, versus only 30,000 hours for an average T8 LFL. Shatterproof (potentially) – Most T8 LED tubes are made with a shatterproof coating. With linear fluorescent, you either had to specially order shatterproof fluorescent lamps or use a tube guard which was costly.