What could cause a P0011 code?

What could cause a P0011 code?

The camshaft timing is off. The valve control solenoid is stuck open. The valve control solenoid system has faulty or damaged wiring. The oil is too viscous and flow to and from the camshaft’s phasers is restrictive.

Can I drive with a P0011 code?

Can I drive my car with a P0011 code? but you will probably be all right. P0011 usually indicates a problem with the variable camshaft timing device. In most cases the car will run without trouble.

Is a P0011 code bad?

The P0011 code can cause a lot of unwanted effects if you do not take care of the diagnostic fix and keep your vehicle in working condition. The engine might run erratic and stalls while driving, which can be very dangerous while you are driving on highways.

How much does it cost to fix code P0011?

How Much Does It Cost To Repair Error Code P0011. The cost of fixing error code P0011 can range from $40 to $2000 depending on the cause of the problem and the age of the vehicle.

How do you fix the engine code P0011?

What repairs can fix the P0011 code?

1. Resetting the fault codes and performing a road test.
2. Changing the oil and filter to the proper oil viscosity for the engine specifications.
3. Repairing or replacing the wiring to the camshaft oil control valve for bank 1 intake camshaft.

How do I know if my camshaft sensor is bad?

Symptoms of a Bad Crankshaft Position Sensor

1. Your Check Engine Light is Blinking.
2. It’s Difficult to Get Your Vehicle to Start.
3. Your Vehicle is Stalling and/or Backfiring.
4. The Engine is Making Your Vehicle Vibrate.

Will changing the oil fix P0011?

In most cases, the P0011 OBD2 Trouble Code is caused by dirty oil. Flushing out the dirty oil and replacing with manufacturer-specified engine oil will fix the problem with no added repairs necessary.

Can too much oil cause P0011?

But the main cause of the P0011 code is dirty or sludgy engine oil. If the oil is too thick or dirty, the oil passages in the camshaft phasers might get clogged or stuck, hence resulting in a constantly advanced timing in the bank 1 camshaft.

Is it safe to drive with a bad camshaft sensor?

Yes, it is safe to drive with a bad camshaft sensor. However, the performance of your engine will not be as good and fuel consumption may increase. In some cases, the camshaft may need replacement if there are any other symptoms of failure on this component.

How do I fix code P0011?

What does diagnostic trouble code p0011 mean?

P0011 is a diagnostic trouble code (DTC) for “Camshaft Position A – Timing Over-Advanced or System Performance (Bank 1)”. This can happen for multiple reasons and a mechanic needs to diagnose the specific cause for this code to be triggered in your situation.

What does engine code p0011 mean?

A P0011 code refers to the VVT (variable valve timing) or VCT (variable camshaft timing) components and the car’s PCM (powertrain control module) or ECM (engine control module). VVT is a technology used in the engine to allow it to get greater power or efficiency at different running points.

What does code p0011 mean on an Impala?

P0011 is a very common trouble code. It affects vehicles with variable valve timing (VVT). The list of VVT vehicles is growing, and the Chevy Impala can have VVT, and is prone to developing this code. P0011: Camshaft Position “A” – Timing Over Advanced -or- System Performance (Bank 1) P0011 is a generic OBDII code.