What is the weight of HSS?
ROUND H.S.S.
| O.D. Inches | Wall Thickness Inches | Weight lb/ft. |
|---|---|---|
| 1.690 | 0.100 | 1.70 |
| 1.690 | 0.125 | 2.09 |
| 1.900 | 0.110–0.188 | 2.10–3.45 |
| 1.900 | 0.110 | 2.10 |
What does HSS mean on structural drawings?
Hollow Structural Sections (HSS) are manufactured hollow steel sections, typically of circular, rectangular, or square cross-section. In the United States, HSS sections conform to either the ASTM Specification A500 or A1085.
What is HSS metric?
70 to M12x1. 75 Die, Metric, Tap and Die Set. High Speed Steel (HSS) provides good wear-resistance and can be used in general purpose applications for both ferrous and nonferrous material Minimum Tap Thread Size (mm) M3x0.
What is an HSS beam?
Hollow steel section (HSS) profiles are steel beams with a hollow cross section. HSS can come in a variety of shapes, including circular, elliptical, square, and rectangular (square and rectangular HSS are sometimes called tube steel or box sections).
How is HSS measured?
HSS Tube is commonly specified using the outside size measurements and the tube wall thickness (square tube example: 2.000” x 2.000″ x 0.250” wall / round tube example: 3.000” Dia. x 0.250” wall).
What is the weight of steel plate?
Steel Plate Thickness and Weight – Imperial Units
| Nominal Size Thickness (inches) | Weight (lb/ft2) |
|---|---|
| 1 5/8 | 66.3 |
| 1 3/4 | 71.4 |
| 1 7/8 | 76.5 |
| 2 | 81.6 |
What grade is HSS steel?
A500 grade C
Today, HSS is commonly available in mild steel, A500 grade C. Other steel grades available for HSS are A847 (weathering steel), A1065 (large sections up to 50 inch sq made with SAW process), and recently approved A1085 (higher strength, tighter tolerances than A500).
How do you specify HSS?
HSS are available in round, square, or rectangular shapes. Round shapes are specified using decimal numbers and three decimal points. For example, HSS 5.563 × 0.258 indicates a round HSS with an outside diameter of 5.563” and a wall thickness of 0.258”.
What size does HSS come in?
What does HSS stand for?
HSS
| Acronym | Definition |
|---|---|
| HSS | High Speed Steel |
| HSS | Health and Social Services (various locations) |
| HSS | Hospital for Special Surgery (New York, NY, USA) |
| HSS | Humanities and Social Sciences |
Is HSS hot rolled?
HSS, or, Hollow Structural Sections, are cold-formed, welded steel tubes used for welded or bolted construction of buildings, bridges, and other structures as well as a wide variety of manufactured products. They are produced in square, round, and rectangular shapes to meet structural design requirements.
How are hollow structural sections ( HSS ) made?
The transformation of steel strip into hollow structural sections (HSS) is the result of operations including forming, welding and sizing. Currently three methods are being used in North America for the manufacture of HSS. These methods, including two ERW methods and an SAW method, are described below.
How big is an ERW HSS column in feet?
Select the lightest 8-inch square ERW HSS column of Fy = 46 ksi (ASTM A500 Gr. B) to support a concentrated axial compressive load of 152 kips. The largest effective length, KL, is 20 feet.
How is the seam of a HSS tube welded?
No cold working of the sides of the shape is performed, and the shape’s seam is welded by high-frequency contacts when the tube is near its final shape and size. The welded tube (4) is cooled and then driven through a series of sizing stations which qualifies the tube’s final dimensions. HSS Manufacturing Methods
How big is the periphery of an HS?
HSS with a maximum periphery of 64 inches are manufactured by the electric-resistance welding (ERW) process. HSS with peripheries greater than 64 inches are manufactured by the submerged arc welding (SAW) process.